replacing 12A with a 13B turbo 2
#1
replacing 12A with a 13B turbo 2
hi every 1 i have a 1985 rx with a 12A engine.i replacing it with a 13B turbo 2 but im having a hard time with the engine mount what can i do to mount it in front like the 12A i replace the front cover of the 13B with the 12A so i can be able to use the front engine mount and i have to modi my oil pan can some 1 help thank you if any 1 have any info
#3
Senior Member
iTrader: (2)
You need the front cover and oil pan from the GSL-SE 13b. You will also have to tap the front cover to create an oil return for the turbo.
The 13b is 2 or 3 centimeters longer than the 12a so you will either have to notch the stock crossmember, find one from a 1st gen with a 13b, get the modified mount from racing beat here, or bend a stock 12a mount to fit.
The 13b is 2 or 3 centimeters longer than the 12a so you will either have to notch the stock crossmember, find one from a 1st gen with a 13b, get the modified mount from racing beat here, or bend a stock 12a mount to fit.
Thread
Thread Starter
Forum
Replies
Last Post
trickster
2nd Generation Specific (1986-1992)
25
07-01-23 04:40 PM
KAL797
Test Area 51
0
08-11-15 03:47 PM