floman

Ok well i have many questions so i will just ask them all so i can get them off my mind. I just installed a single turbo in my 93 fd. I have a power fc. i just installed 1600cc secondaries, an aftermarket fuel rail and a new FPR. The primary injectors are still 550 if you are wondering. Ok so, i go to startup my car and it starts to my suprise, but idles really rough with lots of smoke. I tried adjusting the fuel pressure manuelly with the screw at the top of the fpr but the pressure will not move. Its stuck on 45psi. I tried to program the FC commandor to 1600cc but it will only let me go up to 1500cc. Also i dont have resistors for the injectors. I was wondering what kind of resistors exactly. I am just wondering whats going wrong and what i can do about it. My goal is to get my car running well enough to drive it to a place to get it tuned. I know there are people on this forum who know exactly whats going wrong with my car. So I ask you to be patiant with me and just help out another rx7 owner get his car back on the road again. Thanks
-Floman

Mahjik

iTrader: (1)

Bottom of the page:
http://rx7.com/store/rx7/fdfuel.html

floman

bump