please help with coolant problem
#1
Rotary Enthusiast
Thread Starter
Join Date: Mar 2003
Location: Wilmington,DE
Posts: 1,235
Likes: 0
Received 0 Likes
on
0 Posts
please help with coolant problem
ok i just got my 3rd gen.the engine is a new crate from mazda.replaced in may from hector out of wilmington, DE.the engine is getting too much presure.its blowing hoses.i removed the thermostat and it still has alot of presure.way more than most.what should i do or what is the problem? i am open to any and all advise.thanks, jason
ps.the engine was replaced before i got the car.
ps.the engine was replaced before i got the car.
#2
multipersonality disorder
Join Date: Feb 2002
Location: so. cal
Posts: 5,656
Likes: 0
Received 0 Likes
on
0 Posts
9/10 times bad coolant seals.
double check to make sure you don't have any leaks, etc..
pop the cap off and start the engine. if coolant starts bubbling out right away, time for a rebuild.
double check to make sure you don't have any leaks, etc..
pop the cap off and start the engine. if coolant starts bubbling out right away, time for a rebuild.
Thread
Thread Starter
Forum
Replies
Last Post
ZaqAtaq
New Member RX-7 Technical
2
09-05-15 08:57 PM