General Rotary Tech Support Use this forum for tech questions not specific to a certain model year
Sponsored by:
Sponsored by: CARiD

Noobi with questions

Thread Tools
 
Search this Thread
 
Old Apr 17, 2007 | 12:56 PM
  #1  
Barcode_Racing's Avatar
Thread Starter
Junior Member
 
Joined: Apr 2007
Posts: 8
Likes: 0
From: Columbus, OH
Noobi with questions

Alright, I purchased my first 7 two weeks ago from a guy for 500.00 bucks. He told me he overheated it.. But it just needs a new radiator.. no biggy. But it wont start!
I changed the plugs.. new starter, New plug wires, new coil Trailing and leading,
I tried the de flooding method. Doesn't work... It trys to crank over, but acts like its not getting any ignition. I can smell the fuel.. And I can feel the pump when i kick the key over. Any answers? The car Has sat for 4 months.. could that be the issue?

BTW: its a 2nd gen N/A
Reply
Old Apr 17, 2007 | 01:03 PM
  #2  
87rx7girl's Avatar
Banned. I got OWNED!!!
 
Joined: Mar 2005
Posts: 526
Likes: 0
From: san antonio TX
sitting for 4 months wouldnt be the issue to much. could be bad fuel . could be clogged fuel filter.
could be that a seal is blown.
spend 30 bux on a compression tester. pull the top plug. pull the egi fuse. and spin it over a few times. do this on each rotor.
btw. how many miles are on it?
Reply
Old Apr 17, 2007 | 01:16 PM
  #3  
Barcode_Racing's Avatar
Thread Starter
Junior Member
 
Joined: Apr 2007
Posts: 8
Likes: 0
From: Columbus, OH
Miles 56,xxx. I did a compression test... and it didn't pass. Nothing teribble.. but it was off.
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
_Tones_
Adaptronic Engine Mgmt - AUS
10
May 25, 2021 05:37 AM
Nosferatu
2nd Generation Specific (1986-1992)
7
Sep 5, 2015 02:13 PM




All times are GMT -5. The time now is 01:26 AM.