hi i just rebuilt my rx7 and right now the problem is as follows...

-no fuel priming when car is turn to "on"

-the starter motor wont turn on (no clicking or sounds)

-my ignition source seems to not be getting power (my 12v source for gauges is tied into the steering column ign source pin and the wont light up)

-the gauge cluster has the 4w abs light and the battery light up

however my apexi pfc ecu commander lights up and works. any one ever have similar issues? i thought it was a ground next to the ecu so i made one but it has made no differance. any help would be greatly appreciated, the base im stationed at charges $5 a day and closes when i get off duty, so i only get saturday to work.

important specs on the car:

1994 5 speed
single turbo converted
emissions delete
ets fmic
tial 44mm wastegate
greddy bov
mbc
cjm fuel rail kit (850pri 1650sec)
PFC

any more info needed i am more than happy to give! i need all the help i can get when i comes to electrical witchcraft...

 

anyone have any info on what wiring can be wrong/missing/mixed up? the only wiring change i did was the single turbo main harness deletes, no power harness changes