Need pointers on 12a
#1
Full Member
Thread Starter
Join Date: Mar 2015
Location: Nashville Tn
Posts: 52
Likes: 0
Received 0 Likes
on
0 Posts
Need pointers on 12a
I'm currently working on a 85 12a rx and need some guidance on what I need to know to get it to run . I installed a rb header and Holley carb and intake kit. What primary vacuum lines do I need to connect to the carb and do I need to reinstall the belt driven oil pump thing. Thanks a lot for those that read this , josh.
#2
Moderator
iTrader: (3)
welcome to the board.
i will speak under the assumption that emissions are not a concern for you. it's kind of hard to instruct you on what to do with a vacuum line without knowing which you're referring to. what i will say is you'll probably be fine capping/plugging them though. you will want to hook up the brake vacuum though. as for the air pump, you can delete it.
i will speak under the assumption that emissions are not a concern for you. it's kind of hard to instruct you on what to do with a vacuum line without knowing which you're referring to. what i will say is you'll probably be fine capping/plugging them though. you will want to hook up the brake vacuum though. as for the air pump, you can delete it.
Last edited by diabolical1; 10-08-15 at 01:06 PM.
Thread
Thread Starter
Forum
Replies
Last Post