DQ2162

iTrader: (3)

so recently my car was over heating a little it never got to hot but it did start over heating so i replaced the thermostat water pump and changed all the gaskets on the housing the pump and the thermostat but now i have a heavy leak and i have no clue where its coming from i took a video of it but i cant really tell where the leak is any help would be appreciated


Edit: sorry if i move around alot in the video i was trying to get in closer but couldnt really

arran

Can't watch the vid just now, but if you were into the water pump and housing did you reinstall the two shims that go under the two studs on the exhaust/intake side of the engine?

misterstyx69

iTrader: (142)

hey Shakey!..can't tell where it is either!

DQ2162

iTrader: (3)

which 2 shims ? do you have pics of what your talking about i cant really understand aha and sorry ill try to take a better video when i can

arran

On my webpage here:
Engine Mounting

There is a pic shown here has two spots on the back of the water pump housing circled that need shims to make up for the thickness of the gasket:
http://web.aanet.com.au/~arran/car/p...mp-housing.jpg

bumpstart

if you dont have the shims chuck out the gasket and use RTV.. doesnt need the shims then

DQ2162

iTrader: (3)

kinda late guys but i got it done thanks for the help !!!!