na FC vs B2200 fuel pump
08-11-14, 02:30 PM
#1
Full Member
Thread Starter
iTrader: (1)
Join Date: Apr 2014
Location: Edmonton, Alberta, Canada
Posts: 196
Likes: 0
Received 2 Likes
on
1 Post
na FC vs B2200 fuel pump
Anybody know if the efi B2200 fuel pump and an S4 na RX7 fuel pump have the same flow rating? The both have the same operating pressures, and aftermarket companies list the same part number for a replacement pump. I am running my stock B2200 pump on my swap, and i am wondering if i should switch out the pump. I seem to be running fine, and seems to rev to redline in gear fine, but i have not driven an RX7 before so i have nothing to compare to.
08-11-14, 07:17 PM
#3
Moderator
iTrader: (3)
Join Date: Mar 2001
Location: https://www2.mazda.com/en/100th/
Posts: 30,770
Received 2,562 Likes
on
1,822 Posts
Mazda has a different part number, for the Rx7 and B2200 pumps, but if the aftermarket doesn't then they should be close enough?
it does look like the Rx7 pump would drop right in, so putting the "correct" pump in, would be easy
it does look like the Rx7 pump would drop right in, so putting the "correct" pump in, would be easy
08-12-14, 09:15 PM
#4
Full Member
Thread Starter
iTrader: (1)
Join Date: Apr 2014
Location: Edmonton, Alberta, Canada
Posts: 196
Likes: 0
Received 2 Likes
on
1 Post
I can rev to 7,000RPM fine. I was wondering if I was starting to run lean at the higher RPM's. I think I will leave it for now. I have 2,000KM on the swap already, but the truck has 320,000KM, and I think the pump is original.
Thread
Thread Starter
Forum
Replies
Last Post
trickster
2nd Generation Specific (1986-1992)
25
07-01-23 04:40 PM
ChrisRX8PR
Single Turbo RX-7's
21
10-18-15 04:01 PM
