hey guys can you please help me? so here is what happened i started stripping down my S4 T2 keg so i removed the flywheel nut, and started taking out the front cover,housing and rotor, but i forgot to remove the other nut that holds in the eccentric shaft! ive included some pics. thanks

 

The 19mm e-shaft bolt should be the first thing you remove.

Reinstall the flywheel and nut, and buy a flywheel stopper to keep it from spinning. Then use a large impact to break it loose, if that doesn't work you can heat up the bolt thoroughly to melt any locktite/silicone before trying the impact.

 

yeah i was afraid i had to do that i already have a flywheel stopper, is that the only way? i tried using a rubber strap wrench to hold down the shaft but it didn't work. but tanks for the advice