Lambda Fault!
02-14-02, 12:03 PM
#1
Senior Member
Thread Starter
Join Date: Feb 2002
Location: Sweden
Posts: 281
Likes: 0
Received 0 Likes
on
0 Posts
Lambda Fault!
I recently bought a RX-7 -92 (FD) and now I have got the lambdanumbers from the regulary Car-inspection.
And at 2000 rpm without load it was 1.5. It sould be 1.0-1.1.
One other thing I wonder about is my boost.
I tested in third gear. When the first turbo started i got a boostpeak to 12 psi and then a fast drop to 9psi, a slightly drop at 4000-4500rpm and then a 9psi again to 7000rpm. is this normal?
I really appriciate help.
And at 2000 rpm without load it was 1.5. It sould be 1.0-1.1.
One other thing I wonder about is my boost.
I tested in third gear. When the first turbo started i got a boostpeak to 12 psi and then a fast drop to 9psi, a slightly drop at 4000-4500rpm and then a 9psi again to 7000rpm. is this normal?
I really appriciate help.
02-15-02, 07:07 PM
#2
Senior Member
Thread Starter
Join Date: Feb 2002
Location: Sweden
Posts: 281
Likes: 0
Received 0 Likes
on
0 Posts
I now got a autometer lambda-meter and the meter shows first red light or nothing at no load, and goes to 2 fron maximum on full throttle. Is this normal?
02-16-02, 07:04 PM
#4
Senior Member
Thread Starter
Join Date: Feb 2002
Location: Sweden
Posts: 281
Likes: 0
Received 0 Likes
on
0 Posts
Originally posted by MIKE-P-28
Might wanna post this in 3rd gen specific. We all are poor and have old Rx-7's J/K
Might wanna post this in 3rd gen specific. We all are poor and have old Rx-7's
J/K
Thread
Thread Starter
Forum
Replies
Last Post
Kruel13
1st Generation Specific (1979-1985)
24
09-16-15 09:08 AM
