General Rotary Tech Support Use this forum for tech questions not specific to a certain model year
Sponsored by:
Sponsored by: CARiD

Idle Problem help please

Thread Tools
 
Search this Thread
 
Old Sep 17, 2002 | 08:44 PM
  #1  
skold's Avatar
Thread Starter
Full Member
Tenured Member 10 Years
 
Joined: Apr 2001
Posts: 224
Likes: 0
From: columbus,ohio,usa
Idle Problem help please

ok i got My 10th. Ann on starurday and it ran fine then the starter went out , and i replaced it and that i got it running again it has really rough idle, the car has 150k on it and the compression is 6.5, 6.5, 6.3, 6.1, 6.2, 6.3
runs fine when i am driving just has really bad idle and the car fllods as soon as i drive it. can anyone help?
Reply
Old Sep 18, 2002 | 02:35 PM
  #2  
blu_gxl's Avatar
Full Member
Tenured Member 05 Years
 
Joined: Feb 2002
Posts: 230
Likes: 0
From: rock me amadeus...
the compression is pretty low have you tried atf tick?? if not i'd try that for a possible compression jump. also the injectors you can try a bottle of cleaner but you should have them professionaly cleaned. have you changed all the major items plugs, wires, fuel and air filters, and oils??
Reply
Old Sep 20, 2002 | 11:31 AM
  #3  
skold's Avatar
Thread Starter
Full Member
Tenured Member 10 Years
 
Joined: Apr 2001
Posts: 224
Likes: 0
From: columbus,ohio,usa
Fixed

i had a vac leak right at the turb and i fixed it.
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
barkz
Power FC Forum
37
Nov 21, 2020 09:34 AM
Jeff20B
1st Generation Specific (1979-1985)
73
Sep 16, 2018 07:16 PM
ZacMan
Build Threads
4
Sep 19, 2015 09:20 PM
firzen
2nd Generation Specific (1986-1992)
9
Sep 15, 2015 12:04 PM
rx7shirley
2nd Generation Specific (1986-1992)
6
Sep 2, 2015 02:11 PM




All times are GMT -5. The time now is 09:40 AM.