General Rotary Tech Support Use this forum for tech questions not specific to a certain model year
Sponsored by:
Sponsored by: CARiD

High impedance fuel injector?

Thread Tools
 
Search this Thread
 
Old Jun 1, 2006 | 07:21 PM
  #1  
Escort_GT_SC's Avatar
Thread Starter
Junior Member
Tenured Member 05 Years
 
Joined: Jun 2006
Posts: 6
Likes: 0
From: harrisburg, pa
High impedance fuel injector?

if someone would give me 30sec of their time that would be awesome. im supercharging my ford escort gt. if you guys want to hear the whole story, IM me on AIM at kozzman5555. anywho, im not some noob throwing some ghetto-fab setup together. im legitimately doing a good setup. because of the SC im running i need some dec size injectors. and because ill be using megasquirt id prefer to use high imp. injectors. a little bird told me that some RX7's use high imp. injectors. after trips to autozone, advance auto, which sucked as i hate those places) i was going nowhere fast. is there any rx7 setup that uses injectors that are high imp and flow aove 700cc/min? any help would be awesome. thanks
Reply
Old Jun 3, 2006 | 05:05 PM
  #2  
billyboy's Avatar
Rotary Freak
Tenured Member: 20 Years
Liked
Loved
Community Favorite
 
Joined: Jun 2005
Posts: 1,677
Likes: 287
From: sydney
http://www.hitman.hm/injectors.htm
Reply
Old Jun 3, 2006 | 06:29 PM
  #3  
Escort_GT_SC's Avatar
Thread Starter
Junior Member
Tenured Member 05 Years
 
Joined: Jun 2006
Posts: 6
Likes: 0
From: harrisburg, pa
thanks for the link, but are any of them high impedance?
Reply
Old Jun 6, 2006 | 03:36 PM
  #4  
Escort_GT_SC's Avatar
Thread Starter
Junior Member
Tenured Member 05 Years
 
Joined: Jun 2006
Posts: 6
Likes: 0
From: harrisburg, pa
so....does anyone have an answer, or are you guys just being dudes?
Reply
Old Jun 7, 2006 | 04:07 AM
  #5  
billyboy's Avatar
Rotary Freak
Tenured Member: 20 Years
Liked
Loved
Community Favorite
 
Joined: Jun 2005
Posts: 1,677
Likes: 287
From: sydney
Series 6, 7 and 8 definately, thought the S4/5 was too, but this is contradicted here:

http://www.meggala.com/partcss.htm
Reply
Old Jun 7, 2006 | 05:39 AM
  #6  
kenn_chan's Avatar
Savanna Rx-7
Tenured Member: 20 Years
Liked
Loved
Community Favorite
 
Joined: Jun 2004
Posts: 1,577
Likes: 12
From: yokosuka japan
series 4 on up are all high impedance, I beleive that the 12at also used a high impedance but have never measured it to find out.

series 7 and 8 will get you 850 cc injectors that are high impedance.

kenn
Reply
Old Jun 7, 2006 | 02:40 PM
  #7  
Escort_GT_SC's Avatar
Thread Starter
Junior Member
Tenured Member 05 Years
 
Joined: Jun 2006
Posts: 6
Likes: 0
From: harrisburg, pa
thank you guys. thats awesome. much appreciated
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
morataya
Microtech
1
Aug 16, 2015 09:39 AM




All times are GMT -5. The time now is 01:01 PM.