General Rotary Tech Support Use this forum for tech questions not specific to a certain model year
Sponsored by:
Sponsored by: CARiD

Help with a 2nd gen

Thread Tools
 
Search this Thread
 
Old Mar 29, 2008 | 02:37 AM
  #1  
StatixNWH's Avatar
Thread Starter
Junior Member
Tenured Member 15 Years
 
Joined: Oct 2005
Posts: 18
Likes: 0
From: Tennessee
Help with a 2nd gen

hey guys, I have found out that my manager has a clean 2ng gen covert for sale that runs good he says, and is clean for like CHEAP under 1000 bucks. But there is one little thing. He says the only problem is that when you start it it just revs out the roof. He also says that its some rubber moterized thing (he dosent know) and im not to good with rotaries, so what is this thing he is talking about?
Reply
Old Mar 29, 2008 | 09:50 PM
  #2  
Zerkster's Avatar
RTRY-FTW
Tenured Member 10 Years
iTrader: (22)
 
Joined: Feb 2007
Posts: 1,076
Likes: 0
From: Johnstown Pa
well if to the roof means like 2500 to 3000 RPM thats normal, its part of the warm up procces. it should go to 3000 then sit around 2000 for 30 seconds to a few minutes then down to 740
Reply
Old Mar 29, 2008 | 10:31 PM
  #3  
StatixNWH's Avatar
Thread Starter
Junior Member
Tenured Member 15 Years
 
Joined: Oct 2005
Posts: 18
Likes: 0
From: Tennessee
I think he means, it just keeps revving up up and up
Reply
Old Mar 30, 2008 | 06:24 AM
  #4  
FirstRotaryExp's Avatar
The Brap is Back
Tenured Member 10 Years
iTrader: (3)
 
Joined: Sep 2005
Posts: 2,777
Likes: 1
From: Dandridge, Tennessee
If thats the case then it might have a stuck throttle body or the throttle cable is jammed.
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
demetlaw
3rd Generation Specific (1993-2002)
6
Oct 2, 2015 06:22 PM




All times are GMT -5. The time now is 02:32 AM.