(FD) Removing stock exhaust hangers!
#1
Full Member
Thread Starter
Join Date: Apr 2001
Location: So. Cal
Posts: 50
Likes: 0
Received 0 Likes
on
0 Posts
(FD) Removing stock exhaust hangers!
I was about to replace my exhaust tommorow with a Apexi GT Spec exhaust, and I was wondering what is the best way to take these hangers off and remove the stock exhaust!
Thanks,
Ravi
Thanks,
Ravi
#2
Brute Strength, and a lot of cursing, but some sorta lubricant may help, i cant think of what i used specifically, but your bound to think up something, rubbing alchohol, water, ammonia, windex, vasaline, gasoline, spit, you dot an idea
Huy
Huy
#5
Rotary Poseur
Join Date: Feb 2001
Location: Richmond, BC, Canada
Posts: 718
Likes: 0
Received 0 Likes
on
0 Posts
Haha...that was the 'before' scenario.
BEFORE: Yank, pry, scrape knuckles, bang header, swallow smoot, learn new profanities, ponders what the hell did I get myself into.
Then I saw the light or my can of WD-40 mocking me from the shelf...
AFTER: Pop off rubber hangers, unbolt, chuck rusty old Blitz away, install GT Spec, start her up and enjoy....[insert angelic music here]
Or use KY Jelly.
BEFORE: Yank, pry, scrape knuckles, bang header, swallow smoot, learn new profanities, ponders what the hell did I get myself into.
Then I saw the light or my can of WD-40 mocking me from the shelf...
AFTER: Pop off rubber hangers, unbolt, chuck rusty old Blitz away, install GT Spec, start her up and enjoy....[insert angelic music here]
Or use KY Jelly.
Thread
Thread Starter
Forum
Replies
Last Post
trickster
2nd Generation Specific (1986-1992)
25
07-01-23 04:40 PM