If some people can help me that will be appreciate

I not specialiste in rotary engine but I am tech at the toyota dealer .I am not stupid and can onderstand the mecanique of a rotary.

ok i buy and fc3s non-turbo with and conversion turbo . The guy remove a very thing of evap , egr.
The harness is cut some place .They have and street port with carbon apex seal and the engine have been rebuilt the guy told me .THe compression is 120 psi one the rear rotor and 60 psi on the front . (it is probable swamped)I put oil in the hole of the spark plog to push the compression up but nothing .
I know that the car is going to rich because it smell.I know that the B.A.C valve is defecte cause I can not actuet him. The oxygen sensor is cut because , he told me ,that I dont need him, because he flo to much .I know that the I.A.C is cut to.
When the engine was in the car . The car have soom probleme to start and idle .When I do a run on the stret I ear pink 5500 rpm 6000rpm .

I want to Know wich sensor i need , to don't run rich and have and good idle

 

www.fc3spro.com