Engine/trans removal
08-31-01, 03:49 AM
#1
Senior Member
Thread Starter
Join Date: Mar 2001
Posts: 273
Likes: 0
Received 0 Likes
on
0 Posts
Engine/trans removal
I have two engines and transes out of the cars,need to know if there is some kind of trick to poping off the ring on the splined shaft,so as to seperate the engine from the trans,any help would be greatly appreciated.
Thank you
Thank you
Last edited by MeLoco; 08-31-01 at 03:51 AM.
08-31-01, 08:09 AM
#2
I'm not a Midget!
Join Date: Feb 2001
Location: Westminster, MD, USA
Posts: 738
Likes: 0
Received 0 Likes
on
0 Posts
No real trick, just remove the starter and the bolt that hides under it along with the 5(?) other bolts and one nut (on top at the rear lifting tab) around the bellhousing.
Not sure what ring and splined shaft you are having trouble with?
Not sure what ring and splined shaft you are having trouble with?
Thread
Thread Starter
Forum
Replies
Last Post
Erosangel
3rd Generation Specific (1993-2002)
5
09-18-15 04:06 PM