Engine Harness/ECU
08-24-02, 11:59 AM
#1
Junior Member
Thread Starter
Join Date: Aug 2002
Location: Annapolis,MD
Posts: 7
Likes: 0
Received 0 Likes
on
0 Posts
Engine Harness/ECU
Hi,
I am planning on using a TII (89-91) in my Lotus Seven replica. My question is, does the ECU connect directly to the "Engine Harness" or would I have to get a portion of the main harness as well, etc.
Thank You
T
I am planning on using a TII (89-91) in my Lotus Seven replica. My question is, does the ECU connect directly to the "Engine Harness" or would I have to get a portion of the main harness as well, etc.
Thank You
T
08-26-02, 02:14 AM
#2
Rotary Freak
on a 3 rd gen the ecu is hooked to the engine harnes and the main harness .Is t11 the same ?? try to find a repair book and see. The Lotus is so cool ,it will be so fun I wont a ride.
08-26-02, 11:57 AM
#3
Moderator
iTrader: (3)
Join Date: Mar 2001
Location: https://www2.mazda.com/en/100th/
Posts: 30,792
Received 2,573 Likes
on
1,829 Posts
the ecu has 4 plugs. 3 of these go to stuff on the engine, and one goes to the car. it would be a lot easier to do something like a haltech, because you dont have to figure out as many wires, and it would be easier to make it fit in a not rx7 body
mike
mike
Thread
Thread Starter
Forum
Replies
Last Post
trickster
2nd Generation Specific (1986-1992)
25
07-01-23 04:40 PM
KAL797
Test Area 51
0
08-11-15 03:47 PM
