Helikaon

So when I depress the clutch pedal the pedal stays on the floor and the cluch engages after about 2 seconds.
Tried bleeding it multiple times and it's most likely the master cylinder seals that are causing the fluid pressure to leak back into the overflow (explains the clutch engaging and the pedal not comin back up).
So does anyone have a detailed video or advice for me?
Also where to buy the seal kit so I can rebuild would be helpful.

Thankx.
Nathan K

Helikaon

On mobile so I can't edit.
The car is a 86 fc N/A.
No mods that would effect the hydraulic clutch.

7dust

iTrader: (14)

If there is no fluid leaking out - then it is leaking internally.

Either the fluid is leaking inside the clutch master cylinder OR it is leaking inside the slave.

Replace both and remove all doubt.