General Rotary Tech Support Use this forum for tech questions not specific to a certain model year
Sponsored by:
Sponsored by: CARiD

Car wouldnt start and shooting flames

Thread Tools
 
Search this Thread
 
Old Jan 10, 2009 | 10:06 AM
  #1  
millertime6009's Avatar
Thread Starter
Black Beast
iTrader: (1)
 
Joined: Dec 2008
Posts: 215
Likes: 0
From: Dayton, Ohio
Car wouldnt start and shooting flames

Drove my 88 n/a about 20 miles the other day. Had it off for about 20-30 minutes. When i came back out it wouldnt start. It cranked and sounded like it started to fire but then just went back to cranking. Went to the KOI Cinci show for about 5 hrs and came back...fired right up. On the way home my buddy told me when i downshifted to 3rd and floored it I was spitting flames from my tailpipes. Ive only owned this car for a month now...any ideas as to whats going on?
Reply
Old Jan 11, 2009 | 12:41 AM
  #2  
rnz520's Avatar
No Pistons
Tenured Member 05 Years
iTrader: (10)
 
Joined: Nov 2008
Posts: 822
Likes: 1
From: Culpeper, VA
sounds like you are running rather rich, maybe your maf is going bad or you have a leaky injector
Reply
Old Jan 21, 2009 | 03:44 PM
  #3  
potassemon's Avatar
Full Member
 
Joined: Jul 2008
Posts: 88
Likes: 0
From: Anchorage, AK
+1

my car used to flood everytime I shut it off when it was warm, then I'd wait a while and it would start right up. of course I was broke so I had to rig it so I could use it until I had money. so I'd say get your injectors cleaned, and check out your maf.
Reply
Old Jan 24, 2009 | 01:29 AM
  #4  
trochoid's Avatar
Old Fart Young at Heart
Tenured Member 10 Years
iTrader: (6)
 
Joined: Apr 2004
Posts: 15,145
Likes: 8
From: St Joe MO
Starting problem does sound like leaking injectors. Backfire on downshifting, I bet you hit it, backed off, downshifted and hit it again. That gave the engine enough time to pump raw fuel into the exhaust. You also don't have cats or it wouldn't do that normally. Some guys kill to get big backfires and shoot flames, lol.

You can pull the injectors and send them out to Witchhunter or RC Engineering to have them cleaned and calibrated.
Reply
Old Jan 24, 2009 | 11:27 AM
  #5  
millertime6009's Avatar
Thread Starter
Black Beast
iTrader: (1)
 
Joined: Dec 2008
Posts: 215
Likes: 0
From: Dayton, Ohio
It was all just weird. I havnt had any problems since then.
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Monsterbox
Single Turbo RX-7's
22
Jul 29, 2022 10:48 PM
gtcd
1st Generation Specific (1979-1985)
30
Aug 19, 2015 02:44 AM
ashleymiche
Introduce yourself
0
Aug 14, 2015 12:59 PM




All times are GMT -5. The time now is 10:25 PM.