boost falling at high rpm?
boost falling at high rpm?
hey! i've got an 88 tII and im having problems w/ keeping boost at high rpms on full throttle. it will hold boost if im heavy on the throttle, but not full. is it possible that it has somthing to do w/ feul. oh yeah im running a t04 w/ 750cc secondaries, and a stock feul pump. help me please?
thanks for the help
ps: i dont believe is my profec b-spec II boost cont.
i've messed w/ it enough to rule it out.
thanks for the help
ps: i dont believe is my profec b-spec II boost cont.
i've messed w/ it enough to rule it out.
no it starts to drop at around 5500. and it drops fast. from like 13 to 6 real fast. im gonna keep messing w/ the boost controller and hope thats all it is.
any other suggestions are appreciated
any other suggestions are appreciated
When you say you have a To4 , what is that ? A hybrid or a full out T04E , To4B ?.
If you have a hybrid, those are the symptons. You get 12-15 psi and around 5500 rpm it goes down to about 6- 7 psi.
The way around this is that you need to clip the rear wheel. You loose some spool time, but you can hold higher boost for longer.
If you have a hybrid, those are the symptons. You get 12-15 psi and around 5500 rpm it goes down to about 6- 7 psi.
The way around this is that you need to clip the rear wheel. You loose some spool time, but you can hold higher boost for longer.
Thread
Thread Starter
Forum
Replies
Last Post
Skeese
Adaptronic Engine Mgmt - AUS
65
Mar 28, 2017 03:30 PM
jetlude
Single Turbo RX-7's
4
Aug 18, 2015 04:53 PM



