all my dummy lights are on, what can i check?
05-31-02, 09:53 AM
#1
Full Member
Thread Starter
Join Date: Nov 2001
Location: pittsburgh, pa
Posts: 170
Likes: 0
Received 0 Likes
on
0 Posts
all my dummy lights are on, what can i check?
i just put my new motor in, and all my dummy lights stay on after i start the car(ABS,charge, oil light and water light) all the fluids are good and the alt. is charging (removed the - terminal while car was running and nothing died) does anyone know what it may be?
thanks, scott
thanks, scott
05-31-02, 07:24 PM
#2
Senior Member
Join Date: Feb 2001
Location: Winter Springs, FL
Posts: 261
Likes: 0
Received 0 Likes
on
0 Posts
When that happen to me BOTH my ALt and Battery were bad and I had no clue till they BOTH crapped out on me with in a 2 hour span.
So you might want to check that, and keep an eye on the volt meter.
So you might want to check that, and keep an eye on the volt meter.
06-10-02, 09:38 AM
#4
Full Member
Thread Starter
Join Date: Nov 2001
Location: pittsburgh, pa
Posts: 170
Likes: 0
Received 0 Likes
on
0 Posts
then why did the car keep running when i removed the negative terminal from the battery?
and my pfc shoows like 13.7 volts when the motor is running.
and my pfc shoows like 13.7 volts when the motor is running.
Thread
Thread Starter
Forum
Replies
Last Post
