Add to the collection need help to get it runung
02-13-09, 01:25 PM
#1
Junior Member
Thread Starter
Join Date: Jun 2008
Location: ORTONVILLE, MI
Posts: 16
Likes: 0
Received 0 Likes
on
0 Posts
Add to the collection need help to get it runung
HEY GUYS,
i purchesed the 88 se from NGKTECH got it home wednesday, started working on it late thursday. i got the car to run (actually i drove it last night) the problem i am having now with the car is that you have to keep it reved aboue 3000 rpm or it stalls out right away. i also own an 86 so i was comparing a few things on it and i noticed on the 88 right in front of the throttle the vavle that is their is very loose unlike the one on my 86 that runs great. i am assuming this controls air through the engine and am wondering would this be the reason the car has t be reved above 3grand it is getting too much air? any ideas would be great
i purchesed the 88 se from NGKTECH got it home wednesday, started working on it late thursday. i got the car to run (actually i drove it last night) the problem i am having now with the car is that you have to keep it reved aboue 3000 rpm or it stalls out right away. i also own an 86 so i was comparing a few things on it and i noticed on the 88 right in front of the throttle the vavle that is their is very loose unlike the one on my 86 that runs great. i am assuming this controls air through the engine and am wondering would this be the reason the car has t be reved above 3grand it is getting too much air? any ideas would be great
03-13-09, 12:46 PM
#3
Junior Member
Thread Starter
Join Date: Jun 2008
Location: ORTONVILLE, MI
Posts: 16
Likes: 0
Received 0 Likes
on
0 Posts
I have found a few vacuum problems and fixed them! thank you! the bigger issue now is that the other day i went to pull it onto my trailer to take it to my buddys place. car started right up ran perfect all seamed well suddenly. shut it off came back in a few hours and nothing would not start at all! cranks great but will not even try and start
04-01-09, 08:34 AM
#5
Junior Member
Thread Starter
Join Date: Jun 2008
Location: ORTONVILLE, MI
Posts: 16
Likes: 0
Received 0 Likes
on
0 Posts
decided to trailer it to a friends shop to work on it their. the day i goto drive it in the trailer it starts right up and runs perfect. scared to shut it off i let it run for a bit even drove it for a few. get back home turn it off wait ten min come back starts right up again no problem. wow cool all is well next day goto take it out wont start at all now have to drag it on the trailer get it to the shop check everything fuel, spark, vacuum, deflodding everything we can think of and nothing cranks great has great spark good fuel pressure, checked fuses all are good I'm out of ideas other than thinking what ever controls the fuel to mixture. that is the only other thing i came up with on it but I'm not sure what controls that any help figuring that out would be great thanks for and thoughts and or ideas!!
