General Rotary Tech Support Use this forum for tech questions not specific to a certain model year

2001 Type RS idle problem

Thread Tools
 
Search this Thread
 
Old 10-29-01, 06:20 AM
  #1  
Newbie
Thread Starter
 
2001 Type RS's Avatar
 
Join Date: Oct 2001
Location: Jakarta
Posts: 1
Likes: 0
Received 0 Likes on 0 Posts
2001 Type RS idle problem

Hi Everyone.

I have recently imported a 2001 Type RS from Japan. After breaking in and some modifications (HKS suction kit, HKS cat back Hiper exhaust & front pipe), I was driving in heavy traffic and suddenly idle drops and becomes rough, making the car very jerky at low rpms (everything is fine above 2000 rpm).

Afterwards, the problem got worse and idle is sometimes as low as 500 - 600 rpm (warmed, without AC or electrical load). When I blip the throttle, the rpm needle will shoot up normally but it will stall a few times on its way down to idle.

I have checked all vacuum hoses and they all seemed to be tightly in place. I changed the spark plugs and it was slightly better for only a few miles of driving.

Can anybody help and tell me what is wrong? This is my first RX7 and I really don't know anything about it. Ideas and suggestions would be greatly appreciated. Thank You.
Old 10-29-01, 08:02 AM
  #2  
Full Member

 
Join Date: Aug 2001
Location: Columbus/Cincinnati
Posts: 136
Likes: 0
Received 1 Like on 1 Post
Many idle problems can be attributed to leaky intake manifold gaskets, but on your new car I don't claim any knowledge. I'd do a search on idle problems, find some info and go from there.

~Alex
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
trickster
2nd Generation Specific (1986-1992)
25
07-01-23 04:40 PM
stickmantijuana
Microtech
30
04-23-16 06:37 PM
alphawolff
1st Generation Specific (1979-1985)
17
11-17-15 05:57 PM
Kruel13
1st Generation Specific (1979-1985)
10
08-26-15 12:17 PM



Quick Reply: 2001 Type RS idle problem



All times are GMT -5. The time now is 01:21 AM.