i assume the smaller pieces of the apex seals are installed so they are on the open face side of the rotors?(aka the non-gear side of the rotor, aka the side that faces the intermediate housing surface)

FSM didn't show this clearly for the rear rotor and i just wanted to verify

 

according to a thread i found the small pieces are installed facing the rear of the engine.. is this correct? link to thread: https://www.rx7club.com/3rd-generation-specific-1993-2002-16/finished-my-rebuild-got-question-582767/

 

the "point" of the longer piece should point to the rear, so the small corner piece will be at the rear-facing side of the rotor.

 

yup thanks also just got off the phone with rob at pineapple and he confirmed