Ok, so I can't really find anything on steps to pulling out the 13b from the rx7. If anyone has any type of info please share with me the steps in order as to what to unplug and disconnect before I pull the engine out of the car. or share your links on how to remove the N/A 13b from my 1989 rx7. Anything will be helpful. Thanks!

 

you have a pm.

 

your best bet is to get a copy of the FSM for your car. however, you can also try this: Rotary Resurrection home of the budget rebuild.

 

Not much to read on. Remove drive shaft, unplug everything. Unbolt the tranny mounts and motor mounts, pull out carefully