i have just bought an 88 13b turbo motor for my 91 13b non turbo does anyone know what i need for this motor swap im not sure.

 

you can use the wiring harness but you will have to do some splicing and gain a lot of know-how. you will also need the turbo ecu. its a good thing to upgrade the drivetrain as well, sine the turbo motor will kill the na tranny rather easily. pretty sure the flywheel etc needs to be changed to work with the na tranny.

 

in addition to this, try a search in the 2nd gen specific section.

 

i did the same swap . i got spark , but no fuel. after the cpu wharness ,and hood ull need to run 4 wires of the crank ang sncr ,and splice them into the chassis harns . after that i thought i was finished,i was wrong. did u finish ur 7 if so how did u do it.thanks