RX7Club.com - Mazda RX7 Forum
0 2020/06/04 22:31:41
0 2020/05/31 21:43:10
Enough to cover the lights, efi, and an e-fan
Enough to cover the lights, efi, and an e-fan
0 2020/05/22 22:13:44
New female spade connector 7.3mm if I recall.
New female spade connector 7.3mm if I recall.
0 2020/05/22 22:13:40
IAC polished and CAS wired in . Really I just love this image
IAC polished and CAS wired in . Really I just love this image
0 2020/05/19 22:32:01
Not terribly exciting. But I did get the passenger side buttoned up for wireing.
Not terribly exciting. But I did get the passenger side buttoned up for wireing.
0 2020/05/16 23:28:14
Besides the stray wires it looking more like something close to functional
Besides the stray wires it looking more like something close to functional
0 2020/05/16 23:28:07
Repinned. Turns out I only needed to swap the black wire with the blue with red stripe
Repinned. Turns out I only needed to swap the black wire with the blue with red stripe
0 2020/05/16 23:28:00
Depinning
Depinning
0 2020/05/16 23:27:55
Modifying SA power antenna switch for power windows
Modifying SA power antenna switch for power windows
0 2020/05/16 23:27:48
Replaced corroded wiper motor connector with WeatherPack unit
Replaced corroded wiper motor connector with WeatherPack unit
0 2020/05/16 23:27:40
0 2020/05/15 17:43:16
0 2020/05/15 17:43:10
Paint is a bit off. I’ll have to reshoot later down the road
Paint is a bit off. I’ll have to reshoot later down the road
0 2020/05/13 23:02:34
0 2020/05/13 23:02:26
Digital calipers, a square straight edge and exacto knife to the rescue
Digital calipers, a square straight edge and exacto knife to the rescue
0 2020/05/13 23:02:14
Ready for cutting and paint
Ready for cutting and paint
0 2020/05/13 23:02:09
Sanded and additional epoxy for som touch up spots
Sanded and additional epoxy for som touch up spots
0 2020/05/13 23:02:04
The under side and additional support
The under side and additional support
0 2020/05/13 23:01:53
Thin coat of epoxy
Thin coat of epoxy
0 2020/05/13 23:01:35
Clamping and glueing 1/8 UHMW
Clamping and glueing 1/8 UHMW
0 2020/05/13 23:01:20
Disappointed in the off the shelf rattle can paint
Disappointed in the off the shelf rattle can paint
0 2020/05/13 17:41:37
Stoked about the fitment.
Stoked about the fitment.
0 2020/05/13 17:41:30
ready for paint
ready for paint
0 2020/05/12 18:17:18
Sanding and smoothing
Sanding and smoothing
0 2020/05/12 09:45:34
Second skim coat.
Second skim coat.
0 2020/05/12 09:45:26
0 2020/05/11 21:42:31
0 2020/05/11 21:37:20
0 2020/05/11 21:34:06
0 2020/05/11 21:31:25
0 2020/05/11 21:31:19
0 2020/05/10 17:01:03
0 2020/05/10 13:12:45
pressed in a bushing.
pressed in a bushing.
0 2020/05/09 22:18:02
TPS sensor. real solid bracket. Needs paint.
TPS sensor. real solid bracket. Needs paint.
0 2020/05/09 22:17:56
0 2020/04/05 22:48:29
0 2020/04/05 22:44:16
0 2020/04/05 22:44:10
More of a test fit.
More of a test fit.
0 2020/04/03 20:20:33
0 2020/04/02 22:21:52