RX7Club.com - Mazda RX7 Forum
No way back :)
No way back :)
0 2022/11/09 01:06:04
Two defect housing and two good ones, the good ones have just a tiny exhaust though.
Two defect housing and two good ones, the good ones have just a tiny exhaust though.
0 2022/11/09 01:05:59
Ready for paint.
Ready for paint.
0 2022/11/09 00:58:55
Progress....
Progress....
0 2022/11/09 00:58:52
0 2022/11/09 00:58:47
0 2022/11/09 00:58:43
After alot of grinding and painting the Front suspension is ready for the car :)
After alot of grinding and painting the Front suspension is ready for the car :)
0 2022/11/09 00:58:41
0 2022/11/09 00:58:37
Ongoing
Ongoing
0 2022/11/09 00:58:34
I Bought the car like this, in alot of boxes and alot of rust.
I Bought the car like this, in alot of boxes and alot of rust.
0 2022/11/09 00:58:30
0 2022/11/09 00:58:26
Before.
Before.
0 2022/11/09 00:58:22
0 2022/11/09 00:54:31
0 2022/11/09 00:54:28
0 2022/11/09 00:54:25
0 2022/11/09 00:54:21
0 2022/10/23 12:23:46
0 2022/10/12 04:35:05
0 2022/10/12 04:34:58
0 2022/10/12 04:34:50
0 2022/10/06 11:46:32
0 2022/10/06 11:46:23
0 2022/10/06 11:36:15
0 2022/10/06 11:36:08
0 2022/10/06 11:36:00
Second housing, can still see the honing marks.
Second housing, can still see the honing marks.
0 2022/09/25 11:12:55
0 2022/09/25 11:12:47
Apex seal grove wear or apex seal wear ?
Apex seal grove wear or apex seal wear ?
0 2022/09/25 11:12:40
0 2022/09/25 11:12:32
0 2022/09/25 11:12:24
0 2022/09/25 11:12:17
End bearings have the same grove and also some wear, haven’t measured them yet, but figured they should be replaced.
End bearings have the same grove and also some wear, haven’t measured them yet, but figured they should be replaced.
0 2022/09/25 11:12:09
Oil seal springs looks okay, but how to check ?
Oil seal springs looks okay, but how to check ?
0 2022/09/25 11:12:01
Got told the springs should be replaced even though they are complete ? Any thoughts? Same with side seals? Is they meet tolerance, then I guess they should be ok ?
Got told the springs should be replaced even though they are complete ? Any thoughts? Same with side seals? Is they meet tolerance, then I guess they should be ok ?
0 2022/09/25 11:11:51
Rotors looks in good shape, it I fear the apex grove is worn, can I measure these without new apex seals to see if they are worn out ?
Rotors looks in good shape, it I fear the apex grove is worn, can I measure these without new apex seals to see if they are worn out ?
0 2022/09/25 11:11:43
0 2022/09/25 11:11:34
0 2022/09/23 05:26:04
0 2022/03/22 02:57:31
0 2022/03/22 02:50:24
0 2022/03/22 02:49:30