RX7Club.com - Mazda RX7 Forum
Attaching clip for the cruise control cable.
Attaching clip for the cruise control cable.
0 2026/05/10 17:35:26
Can you make it anymore convoluted!
Can you make it anymore convoluted!
0 2026/05/08 12:38:03
0 2026/05/04 18:23:07
0 2026/05/01 20:00:45
0 2026/04/26 12:33:38
0 2026/04/25 17:52:19
0 2025/11/09 13:56:43
0 2025/11/09 13:46:19
Brittle air line for oil nozzle
Brittle air line for oil nozzle
0 2025/11/09 12:58:20
0 2025/07/30 13:14:17
0 2025/06/28 13:12:48
Along the back of the hosing. You can see my EGI ground at the upper left.
Along the back of the hosing. You can see my EGI ground at the upper left.
0 2025/06/28 13:05:47
0 2025/06/28 13:03:13
0 2025/06/28 13:00:23
0 2025/06/28 12:54:37
Bracket to LIM
Bracket to LIM
0 2025/06/28 12:52:26
0 2025/06/14 16:11:43
0 2025/06/14 16:11:37
0 2025/06/14 16:11:32
Do not use paper towels to block the intake ports!
Do not use paper towels to block the intake ports!
0 2025/05/12 18:45:29
Open end with some WD40 in it, once it opens the oil will flow down inside the plunger.
Open end with some WD40 in it, once it opens the oil will flow down inside the plunger.
0 2025/04/19 14:55:09
0 2025/04/19 14:54:58
0 2025/03/13 17:56:43
top
top
0 2025/02/23 13:59:51
right side
right side
0 2025/02/23 13:59:36
left side
left side
0 2025/02/23 13:59:27
front
front
0 2025/02/23 13:59:18
bottom
bottom
0 2025/02/23 13:59:03
EGR diaphragm from a Jetta
EGR diaphragm from a Jetta
0 2025/02/12 18:29:49
noise supression
noise supression
0 2025/01/23 21:11:59
#2 secondary throttle diaphragm
#2 secondary throttle diaphragm
0 2025/01/23 19:09:53
free height of spring
free height of spring
0 2025/01/23 19:09:51
interior parts
interior parts
0 2025/01/23 19:09:49
membrane and arm
membrane and arm
0 2025/01/23 19:09:48
vertical cut in membrane
vertical cut in membrane
0 2025/01/23 19:09:45
Vacuum lines and piping
Vacuum lines and piping
0 2025/01/23 18:48:30
damaged membrane
damaged membrane
0 2025/01/23 18:31:30
cut line
cut line
0 2025/01/23 16:46:22
Initial arm angle
Initial arm angle
0 2025/01/23 16:46:20
Final fitment
Final fitment
0 2025/01/23 16:46:18