RX7Club.com - Mazda RX7 Forum
Before
Before
0 2019/12/17 04:49:36
0 2019/12/17 04:49:26
0 2019/12/05 07:08:41
Rotary aviation metering pump adapter has arrived :)
Rotary aviation metering pump adapter has arrived :)
0 2019/12/05 07:08:24
After Took about 4 hours to remove the tape and replace it I ran out of the felt material at the end . So will have to finish it tomorrow . Still need to redo the radio harness connectors properly and sand down the earth points so they make propper contact . So happy with the result so far ;)
After Took about 4 hours to remove the tape and replace it I ran out of the felt material at the end . So will have to finish it tomorrow . Still need to redo the radio harness connectors properly and sand down the earth points so they make propper contact . So happy with the result so far ;)
0 2019/11/27 10:32:57
Decided while the Harness is out I should re tape it and replace the old brittle anti rattle foam with new one
Decided while the Harness is out I should re tape it and replace the old brittle anti rattle foam with new one
0 2019/11/27 10:32:49
After
After
0 2019/11/27 10:32:39
Before
Before
0 2019/11/27 10:32:34
Before
Before
0 2019/11/27 10:32:27
0 2019/11/27 10:31:20
0 2019/11/27 10:31:13
Looks awesome , just fetched the carrier in my lunch break and was even cheaper paid 250 Rand which is 16.50 US for sandblasting and powder coating. Can’t wait to fit this back on the dash 😁
Looks awesome , just fetched the carrier in my lunch break and was even cheaper paid 250 Rand which is 16.50 US for sandblasting and powder coating. Can’t wait to fit this back on the dash 😁
0 2019/11/27 02:29:51
Removed the harness so I can get the carrier sandblasted and powder coated
Removed the harness so I can get the carrier sandblasted and powder coated
0 2019/11/25 11:35:08
Removed the dash carrier
Removed the dash carrier
0 2019/11/25 11:35:02
Cleaned up the dash a little still need to clean it a bit more
Cleaned up the dash a little still need to clean it a bit more
0 2019/11/25 11:34:54
New dash
New dash
0 2019/11/25 11:34:44
Engine bay is also slowly comming together .Still have the old UIM and LIM fitted as a mock-up . All brackets are powder coated and cleaned to look like new
Engine bay is also slowly comming together .Still have the old UIM and LIM fitted as a mock-up . All brackets are powder coated and cleaned to look like new
0 2019/11/20 22:05:09
Finally my upgraded fuel connector arrived so i can run my 2 in tank pumps safely
Finally my upgraded fuel connector arrived so i can run my 2 in tank pumps safely
0 2019/11/20 22:05:02
After a few setbacks the gearbox is fixed and ready for install again
After a few setbacks the gearbox is fixed and ready for install again
0 2019/11/08 07:43:41
0 2019/10/25 08:47:35
0 2019/10/25 08:47:32
0 2019/10/25 08:47:29
0 2019/10/25 08:47:26
0 2019/10/25 08:47:23
0 2019/10/25 08:47:21
0 2019/10/25 08:47:18
0 2019/10/25 08:47:14
0 2019/10/25 08:47:11
0 2019/10/25 08:47:07
0 2019/10/25 08:47:03
Just got my Autoexe underbody braces that I won on yahoo auctions ;) unfortunately the two triangular pieces are missing but gonna have a friend that will fabricate them for me . After that will sandblast and powder coat them again in red so they look like new again
Just got my Autoexe underbody braces that I won on yahoo auctions ;) unfortunately the two triangular pieces are missing but gonna have a friend that will fabricate them for me . After that will sandblast and powder coat them again in red so they look like new again
0 2019/10/22 08:29:30
0 2019/10/18 10:57:13
Wiring is also making nice progress
Wiring is also making nice progress
0 2019/10/18 10:57:07
That galavanizing makes such a difference
That galavanizing makes such a difference
0 2019/10/18 10:57:01
The zinc coating looks better then when the pipe was new
The zinc coating looks better then when the pipe was new
0 2019/10/18 10:56:55
New an bungs welded on
New an bungs welded on
0 2019/10/18 10:56:52
Everything polished
Everything polished
0 2019/10/18 10:56:48
KTS Super tower bar arrived
KTS Super tower bar arrived
0 2019/10/18 10:56:43
0 2019/10/18 08:36:22
Wiring is also comming along nice
Wiring is also comming along nice
0 2019/10/18 08:36:18