RX7Club.com - Mazda RX7 Forum
0 2018/07/23 08:56:37
0 2018/07/23 08:55:48
0 2018/07/23 08:54:12
0 2018/07/23 08:34:37
0 2017/11/14 18:56:54
1 2017/11/14 18:56:22
0 2016/09/23 08:17:07
0 2016/09/23 08:16:35
0 2016/09/17 12:12:10
0 2016/07/14 23:26:00
0 2016/05/29 13:03:47
0 2016/03/10 18:18:35
0 2015/09/27 07:12:26
5th place battle.
5th place battle.
0 2013/02/05 20:53:24
This when on most of the race
This when on most of the race
0 2013/02/05 20:53:24
IMG 4462 (2)
IMG 4462 (2)
2 2012/10/03 08:15:35
But when everything was done. The 13" rims fit nice.
But when everything was done. The 13" rims fit nice.
0 2014/05/04 07:59:18
Clearance at the caliper was the biggest pain.
Clearance at the caliper was the biggest pain.
0 2014/05/04 07:59:18
7s Only BIG Strut and brake set up. But I wanted to run 13's. so I adapted the 10" rotor. This is the 10" on top and the 12" on the bottom
7s Only BIG Strut and brake set up. But I wanted to run 13's. so I adapted the 10" rotor. This is the 10" on top and the 12" on the bottom
0 2014/05/04 07:59:18
Back in 2nd before slower traffic held me back and the 23 repassed me
Back in 2nd before slower traffic held me back and the 23 repassed me
0 2011/10/16 17:24:53
The 44 car just before he passed me and spun letting the 23 car pass me. So I went to 3rd back to 2nd back to 3rd
The 44 car just before he passed me and spun letting the 23 car pass me. So I went to 3rd back to 2nd back to 3rd
0 2011/10/16 17:24:53
Passed two more for 2nd
Passed two more for 2nd
0 2011/10/16 17:22:57
Started in 6th passed 2 for 4th
Started in 6th passed 2 for 4th
0 2011/10/16 17:21:00
Getting ready for the weekend
Getting ready for the weekend
0 2011/04/18 00:48:41
New Aluminum radiator and mounts
New Aluminum radiator and mounts
0 2011/04/18 00:35:31
Radiator still needs to be trimed
Radiator still needs to be trimed
0 2011/04/18 00:35:31
This radiator has a straight outlet on the bottom. I found a NAPA hose to directly fit after triming it to size. P/N 9494
This radiator has a straight outlet on the bottom. I found a NAPA hose to directly fit after triming it to size. P/N 9494
0 2011/04/18 00:35:31
Mar 06 Nasa Race Group C
Mar 06 Nasa Race Group C
0 2011/03/20 07:24:25
Bump steer spacer and sway bar end links installed
Bump steer spacer and sway bar end links installed
0 2011/03/20 07:07:02
Struts installed
Struts installed
0 2011/03/20 07:07:02
Mar 05 Nasa Race Group C Race 320pm CP4 1311
Mar 05 Nasa Race Group C Race 320pm CP4 1311
0 2011/03/08 12:05:59
4 2011/02/21 10:30:48
30" primarys to a 2.5" collector back to 3" section. Back to a 2.5". This is for a stock port 12a with a weber 48 ida. All ready for welding the tail pipe.
30" primarys to a 2.5" collector back to 3" section. Back to a 2.5". This is for a stock port 12a with a weber 48 ida. All ready for welding the tail pipe.
0 2011/02/21 10:30:48
Seem to fit nice, but looks like I'm going to run straight pipe, no Muffler fot the fist race.
Seem to fit nice, but looks like I'm going to run straight pipe, no Muffler fot the fist race.
0 2011/02/21 10:30:48
IMG 0589
IMG 0589
0 2011/02/14 01:23:53
now I need to bolt it on to check the clearance
now I need to bolt it on to check the clearance
0 2011/02/11 08:37:05
Test fit
Test fit
0 2011/02/11 08:37:05
Collector welded up
Collector welded up
0 2011/02/11 08:37:05
Strut ready for the coil over
Strut ready for the coil over
2 2011/02/08 12:20:10
ou can see the sleve welded in place
ou can see the sleve welded in place
0 2011/02/08 12:20:10