RX7Club.com - Mazda RX7 Forum
0 2024/05/14 19:28:20
She is down for now as I rip out the subframe and oil pan to take care of an oil pan leak.
She is down for now as I rip out the subframe and oil pan to take care of an oil pan leak.
0 2024/07/19 20:29:42
Subframe cleaned and painted.
Subframe cleaned and painted.
0 2024/07/19 20:29:45
Oil pan cleaned, manipulated back to form and painted.
Oil pan cleaned, manipulated back to form and painted.
0 2024/07/19 20:29:49
0 2024/07/19 20:29:52
0 2024/07/21 13:17:38
0 2024/07/22 21:13:27
0 2024/08/30 05:15:08
0 2024/09/03 20:55:37
0 2024/09/03 20:58:17
I am not sure how i got this photo to work but here is CC components ball joints for lowered cars.
I am not sure how i got this photo to work but here is CC components ball joints for lowered cars.
0 2024/09/03 21:00:04
The lower control arm modified and cleaned with the new ball joint.
The lower control arm modified and cleaned with the new ball joint.
0 2024/09/03 21:00:08
Trying to fix my picture upload issue. This is a picture of some current work being done. If i can get my pics to load, i will catch this build page up to speed.
Trying to fix my picture upload issue. This is a picture of some current work being done. If i can get my pics to load, i will catch this build page up to speed.
0 2025/03/22 23:35:26
0 2025/04/02 21:00:48
Ita been a while since i have been able to post pics. I can now post pocs with my new phone. Switched from Microtech to Fuel Tech in a hope to run a flex sensor and flez fuel.
Ita been a while since i have been able to post pics. I can now post pocs with my new phone. Switched from Microtech to Fuel Tech in a hope to run a flex sensor and flez fuel.
0 2025/04/02 20:59:20
0 2025/04/02 21:00:28
0 2025/04/02 21:00:35
0 2025/04/02 21:00:42
0 2025/04/02 21:00:55
0 2025/04/02 21:01:03
0 2025/04/02 21:01:12
0 2025/04/02 21:01:21
0 2025/04/02 21:01:29
0 2025/04/02 21:01:36
0 2025/04/06 07:29:13
0 2025/04/06 07:30:25
0 2025/04/06 07:30:32
Engine is in and new Fuel Tech injectors and computer. Thank you to Edgar for the tunning and the wire harness. Super clean install and the base tune made the first start effortlessly.
Engine is in and new Fuel Tech injectors and computer. Thank you to Edgar for the tunning and the wire harness. Super clean install and the base tune made the first start effortlessly.
0 2025/04/28 04:45:06
Rotors/housings/and plates done after fuel slush at a roadcourse a few weeks before DGRR.
Rotors/housings/and plates done after fuel slush at a roadcourse a few weeks before DGRR.
0 2025/04/19 20:02:23
Picked up a brand new engine from my buddy Tito.
Picked up a brand new engine from my buddy Tito.
0 2025/04/19 20:03:50
0 2025/04/19 20:04:52
Microtech out Fuel Tech in. Not knocking of Microtech and my tuner Kilo was great always but i wanted to tey something different.
Microtech out Fuel Tech in. Not knocking of Microtech and my tuner Kilo was great always but i wanted to tey something different.
0 2025/04/19 20:06:56
0 2025/04/19 20:08:24
Nothing on the old motor was worth keeping so, i bought my buddy Tito spare motor built by Petit Racing with zero miles.
Nothing on the old motor was worth keeping so, i bought my buddy Tito spare motor built by Petit Racing with zero miles.
0 2025/04/28 04:42:27
Tito came through as i needed the a motor right away, if i was to make it to DGRR 2025.
Tito came through as i needed the a motor right away, if i was to make it to DGRR 2025.
0 2025/04/28 04:44:35
The OEM apex seals were removed and Aviation classics were installed.
The OEM apex seals were removed and Aviation classics were installed.
0 2025/04/28 04:44:43
0 2025/04/28 04:44:49
My buddy Joey did the install and i wrenched on some odds and ends.
My buddy Joey did the install and i wrenched on some odds and ends.
0 2025/04/28 04:44:55
We are on it!!!
We are on it!!!
0 2025/04/28 04:45:00
0 2025/04/19 20:01:38