RX7Club.com - Mazda RX7 Forum
Finished product, minus Single DIN stereo! Almost looks OEM I think.
Finished product, minus Single DIN stereo! Almost looks OEM I think.
0 2019/10/28 19:14:53
Back shows 1/8th ABS Plastic that is bonded in place with epoxy.
Back shows 1/8th ABS Plastic that is bonded in place with epoxy.
0 2019/10/28 19:14:55
Finished with Momo Prototipo!
Finished with Momo Prototipo!
0 2019/10/28 19:20:07
0 2019/11/01 13:08:45
0 2019/11/01 13:08:59
0 2019/12/28 05:56:58
0 2019/12/28 05:57:00
From AE86 google..
From AE86 google..
0 2020/01/02 11:25:11
This is where 100% of the foam bolster reinforcement ends up.
This is where 100% of the foam bolster reinforcement ends up.
0 2020/03/31 14:33:58
Cut to size. Size it so that the new foam rests on the metal base frame.
Cut to size. Size it so that the new foam rests on the metal base frame.
0 2020/03/31 14:34:09
Drivers side. This is how it came out of the car...
Drivers side. This is how it came out of the car...
0 2020/03/31 14:34:16
Gorilla tape with spray adhesive.
Gorilla tape with spray adhesive.
0 2020/03/31 14:34:24
0 2020/03/31 14:34:33
0 2020/04/07 14:28:12
0 2020/04/14 16:43:04
0 2020/04/15 03:51:13
0 2020/04/16 17:22:14
0 2020/04/16 17:26:38
0 2020/04/16 17:30:03
0 2020/04/17 12:59:09
0 2020/04/28 15:04:22
On front fenders starting behind front wheels..rockers.. and wrapping around part of lower quarter.
On front fenders starting behind front wheels..rockers.. and wrapping around part of lower quarter.
0 2020/06/12 07:38:03
Ready to go in.
Ready to go in.
0 2020/06/27 15:19:23
Decked on a mill.
Decked on a mill.
0 2020/06/27 15:19:25
Pre heat the castings then TIG weld.
Pre heat the castings then TIG weld.
0 2020/06/27 15:19:27
0 2020/07/15 18:24:10
0 2020/07/15 18:24:15
0 2020/07/23 14:59:51
0 2020/07/26 07:31:16
0 2020/08/03 15:22:41
0 2020/09/17 16:10:31
0 2020/09/17 16:10:33
0 2020/09/17 16:10:34
0 2020/10/24 14:17:28
1 2020/12/14 15:05:50
0 2021/02/10 18:31:56
0 2021/02/10 18:32:23
0 2021/02/10 18:32:40
Small cracks fund as the fabric over-braid is pulled back.
Small cracks fund as the fabric over-braid is pulled back.
0 2021/04/25 07:11:29
0 2021/04/25 07:11:39