RX7Club.com - Mazda RX7 Forum
0 2016/03/31 08:15:20
Miata red stitched wheel wired for fd connectors and holes drilled.
Miata red stitched wheel wired for fd connectors and holes drilled.
0 2016/03/31 10:50:58
PCM controlled fan relays being wired in
PCM controlled fan relays being wired in
0 2016/03/31 10:51:05
Exhaust system heat wrapped ready to be put on.
Exhaust system heat wrapped ready to be put on.
0 2016/03/31 10:51:32
Almost Done!
Almost Done!
0 2016/03/31 10:51:37
Oil cooler, rad, power steering cooler mounted now just to make an undertray.
Oil cooler, rad, power steering cooler mounted now just to make an undertray.
0 2016/03/31 10:53:33
Intake fitment testing
Intake fitment testing
0 2016/04/08 08:32:10
Obd port mounted behind the glove box... still easily accesible
Obd port mounted behind the glove box... still easily accesible
0 2016/04/08 08:32:21
Interior almost done!
Interior almost done!
0 2016/04/08 08:32:25
0 2016/04/19 11:45:51
0 2016/04/19 11:45:59
0 2016/04/19 11:46:03
0 2016/04/19 11:46:09
Almost all completed just stock water temp gauge to be hooked up and then realign a couple of things and add fluids!
Almost all completed just stock water temp gauge to be hooked up and then realign a couple of things and add fluids!
0 2016/04/19 11:46:54
New driveshaft bolts seem to misplace mine
New driveshaft bolts seem to misplace mine
0 2016/04/19 11:46:59
Some brake stuff
Some brake stuff
0 2016/04/19 11:47:03
MGW shifter installed..... Those front bolts were a real pita
MGW shifter installed..... Those front bolts were a real pita
0 2016/04/19 11:47:07
Engine bay completed. Hood dampers installed. Now time to make an undertray and radiator ducting.
Engine bay completed. Hood dampers installed. Now time to make an undertray and radiator ducting.
0 2016/05/02 08:17:32
Diffuser mounted and exhaust sitting in place... Need to fab up the vband flanges to connect it all together. Test fitting a spoiler I had seems to be ok..... still debating on spoiler or not.
Diffuser mounted and exhaust sitting in place... Need to fab up the vband flanges to connect it all together. Test fitting a spoiler I had seems to be ok..... still debating on spoiler or not.
0 2016/05/02 08:17:36
On way to alignment shop today! May have to black out that oil cooler.
On way to alignment shop today! May have to black out that oil cooler.
0 2016/05/02 08:17:41
0 2016/05/02 08:17:44
Final stance before it gets aligned. Wheel specs: 18x9 +40 255/35/18 18x9.5 +40 265/35/18
Final stance before it gets aligned. Wheel specs: 18x9 +40 255/35/18 18x9.5 +40 265/35/18
0 2016/05/02 08:17:49
New shifter bushing and cover
New shifter bushing and cover
0 2016/05/12 11:23:44
Old worn pillowballs out!
Old worn pillowballs out!
0 2016/05/12 11:23:51
New pillowballs in from J-Auto just need to install the snap rings!
New pillowballs in from J-Auto just need to install the snap rings!
0 2016/05/12 11:23:55
Final engine bay setup for now....
Final engine bay setup for now....
0 2016/05/12 11:24:00
Late night spoiler install using the stock hole so it can be removed easily. Taillight modification with Yellow turn rings as well came out quite nice. This is the second pair I have done now.
Late night spoiler install using the stock hole so it can be removed easily. Taillight modification with Yellow turn rings as well came out quite nice. This is the second pair I have done now.
0 2016/05/12 11:24:02
0 2016/05/24 08:24:18
Another Shot from the track
Another Shot from the track
0 2016/05/31 08:10:05
0 2016/05/31 10:23:53
0 2016/05/31 10:25:55
0 2016/05/31 10:26:12
Picked up some R1 seats and gave them a good cleaning.
Picked up some R1 seats and gave them a good cleaning.
0 2016/06/27 08:20:43
Picked up some forgestar f14's 18x9.5 +42 255/35/18 Re71r front 265/35/18 Re71r rear
Picked up some forgestar f14's 18x9.5 +42 255/35/18 Re71r front 265/35/18 Re71r rear
0 2016/06/27 08:20:48
0 2016/06/29 12:24:53
0 2016/06/29 12:24:56
0 2016/06/29 12:25:09
0 2016/06/30 08:27:30
0 2016/06/30 08:28:16
0 2016/07/05 06:20:18