RX7Club.com - Mazda RX7 Forum
0 2025/03/06 05:45:12
0 2025/03/20 08:45:11
0 2025/03/20 08:49:48
0 2025/03/20 08:51:22
0 2025/03/06 05:46:22
Old pic with Konigs with old tires on it.
Old pic with Konigs with old tires on it.
0 2025/04/14 16:57:55
I replaced the old TFI coils in this pic with new ones. Made 3 harnesses; dizzy to HEIs, HEIs to coils and fan with temp controller. The fuse box has 3 minirelays and 10 fuse slots.
I replaced the old TFI coils in this pic with new ones. Made 3 harnesses; dizzy to HEIs, HEIs to coils and fan with temp controller. The fuse box has 3 minirelays and 10 fuse slots.
0 2025/04/14 17:01:18
0 2025/07/25 06:44:02
Old lines
Old lines
0 2025/08/05 07:14:23
Upside down pic of old cooler.
Upside down pic of old cooler.
0 2025/08/05 07:14:28
New hardmounts on the new cooler.
New hardmounts on the new cooler.
0 2025/08/05 07:18:49
Back side
Back side
0 2025/08/05 07:22:55
0 2025/08/05 07:23:01
Top side
Top side
0 2025/08/05 07:23:05
Front side
Front side
0 2025/08/05 07:23:09
0 2025/08/05 07:28:25
0 2025/08/05 07:26:27
0 2025/08/05 07:26:31
0 2025/08/05 07:26:40
0 2025/08/05 07:26:36
This shows the old RB hose is not quite long enough to attach to the new cooler connection.
This shows the old RB hose is not quite long enough to attach to the new cooler connection.
0 2025/08/05 07:35:26
0 2025/08/05 07:54:33
0 2025/10/27 12:04:28
0 2025/11/21 05:32:29
0 2025/12/08 07:24:31
0 2025/12/08 07:24:36
0 2025/12/16 07:49:38
Rear mounts from below.
Rear mounts from below.
0 2026/01/04 16:14:01
Passenger side of rear mount,
Passenger side of rear mount,
0 2026/01/04 16:14:15
Driver side of rear mount
Driver side of rear mount
0 2026/01/04 16:14:20
Muffler mid point mount
Muffler mid point mount
0 2026/01/04 16:14:35
Mid pipe mount before muffler pipe.
Mid pipe mount before muffler pipe.
0 2026/01/04 16:14:39
The longer bolts I needed to do this. I also got some lock nuts and washers as well. These are m8 x 1.25 which is the OEM thread for the mounts.
The longer bolts I needed to do this. I also got some lock nuts and washers as well. These are m8 x 1.25 which is the OEM thread for the mounts.
0 2026/01/04 16:15:01
0 2026/01/20 14:34:46
0 2026/03/09 06:15:58
0 2026/03/19 07:01:20
0 2026/04/17 12:32:53