RX7Club.com - Mazda RX7 Forum
DSCI0936 Stock rotors with over 247k original miles hiding behind the rims. Soon to be replaced with slotted rotors of some sort.
DSCI0936 Stock rotors with over 247k original miles hiding behind the rims. Soon to be replaced with slotted rotors of some sort.
0 2013/02/13 18:28:56
DSCI1496 Since I striped the upper threads on the orinal f/l hard brake line, I had to replace it with a new unit from MAZDATRIX.
DSCI1496 Since I striped the upper threads on the orinal f/l hard brake line, I had to replace it with a new unit from MAZDATRIX.
0 2013/02/13 18:28:56
DSCI1495 The old f/l hard brake line is loose and ready to be removed.
DSCI1495 The old f/l hard brake line is loose and ready to be removed.
0 2013/02/13 18:28:56
DSCI1498 The new f/l brake hard line now in place.
DSCI1498 The new f/l brake hard line now in place.
0 2013/02/13 18:37:55
228294 109794149187055 2113144609 n The old and very worn brake master cylinder with, yes over 247k miles on it. Even though the brake booster looks old and worn too, it actually is in good physical condition.
228294 109794149187055 2113144609 n The old and very worn brake master cylinder with, yes over 247k miles on it. Even though the brake booster looks old and worn too, it actually is in good physical condition.
0 2013/02/13 18:43:52
598622 109794695853667 1916056194 n Proof, the brake master cylinder seal was shot. The brake booster is still 100 though, just needs a good cleaning, sanding and paint.
598622 109794695853667 1916056194 n Proof, the brake master cylinder seal was shot. The brake booster is still 100 though, just needs a good cleaning, sanding and paint.
0 2013/02/13 18:46:30
60815 109795425853594 1382199554 n The new brake master cylinder (from Pep Boys) now in place.
60815 109795425853594 1382199554 n The new brake master cylinder (from Pep Boys) now in place.
0 2013/02/13 18:48:21
198108 109795929186877 318574565 n Brake fluid resevior now in place. Word of advise, remove the brake fluid resevior while the brake master cylinder is still in place, and install it the same way. Be sure to lube the rubber grommets too, or you will have a hard time pressing the brake fluid resevior back in place.
198108 109795929186877 318574565 n Brake fluid resevior now in place. Word of advise, remove the brake fluid resevior while the brake master cylinder is still in place, and install it the same way. Be sure to lube the rubber grommets too, or you will have a hard time pressing the brake fluid resevior back in place.
0 2013/02/13 18:50:01
New front and rear brake pads are now in place. My camera batteries went out so the only picture I could take is of the rear new pads in place. This is just a quick fix, I will be replacing the front and rear rotors with slotted units, paint the calipers, replace the stock brake hoses with stainless steel hoses, replace the front and rear wheel bearings, and paint the brake booster. To be continued...
New front and rear brake pads are now in place. My camera batteries went out so the only picture I could take is of the rear new pads in place. This is just a quick fix, I will be replacing the front and rear rotors with slotted units, paint the calipers, replace the stock brake hoses with stainless steel hoses, replace the front and rear wheel bearings, and paint the brake booster. To be continued...
0 2013/02/28 01:40:42