RX7Club.com - Mazda RX7 Forum
switched to waffles and 185-70-13. Never looked back
switched to waffles and 185-70-13. Never looked back
0 2012/02/22 10:28:42
took it to work for the day
took it to work for the day
3 2012/02/22 10:27:33
simple exhaust
simple exhaust
0 2012/02/22 10:26:05
runs and drives
runs and drives
0 2012/02/22 10:26:05
had to trim about an inch off the fan...ended up going dual electric after a while
had to trim about an inch off the fan...ended up going dual electric after a while
0 2012/02/22 10:23:06
time to wire it up
time to wire it up
0 2012/02/22 10:23:06
getting there
getting there
0 2012/02/22 10:21:13
champion radiator...gave a little more needed space in front
champion radiator...gave a little more needed space in front
0 2012/02/22 10:17:46
paint
paint
0 2012/02/22 10:14:32
new clutch and resurfaced flywheel
new clutch and resurfaced flywheel
0 2012/02/22 10:12:59
fresh water pump
fresh water pump
0 2012/02/22 10:12:59
time for engine prep
time for engine prep
0 2012/02/22 10:11:05
cleaned and painted behind and installed finally
cleaned and painted behind and installed finally
0 2012/02/22 10:11:05
car was auto so something had to be done about the pedals
car was auto so something had to be done about the pedals
0 2012/02/22 10:08:07
adding a slave cylinder for the clutch
adding a slave cylinder for the clutch
0 2012/02/22 10:08:07
decided to go with a stock exhaust manifold. Fits like it was meant to be
decided to go with a stock exhaust manifold. Fits like it was meant to be
0 2012/02/22 10:06:22
trans mount...ugly, but effective
trans mount...ugly, but effective
0 2012/02/22 10:04:34
trans modified mount
trans modified mount
0 2012/02/22 10:04:34
shifter position...a little trimming will be needed
shifter position...a little trimming will be needed
0 2012/02/22 10:02:28
shifter position
shifter position
0 2012/02/22 10:02:28
stock GLC drive shaft fits!
stock GLC drive shaft fits!
0 2012/02/22 10:02:28
spacers fitted
spacers fitted
0 2012/02/22 10:00:40
new radiator clearance
new radiator clearance
0 2012/02/22 10:00:40
spacers drilled
spacers drilled
0 2012/02/22 10:00:40
rx3 mount set up puts motor very close to radiator.
rx3 mount set up puts motor very close to radiator.
0 2012/02/22 09:58:42
1 inch spacers to give some breathing room
1 inch spacers to give some breathing room
0 2012/02/22 09:58:42
mock up
mock up
0 2012/02/22 09:58:42
radiator support before
radiator support before
0 2012/02/22 09:57:07
radiator support after
radiator support after
0 2012/02/22 09:57:07
mock up
mock up
0 2012/02/22 09:57:07
bay needs paint
bay needs paint
0 2012/02/22 09:55:21
bay needs paint
bay needs paint
0 2012/02/22 09:55:21
parts that need clean up and attention
parts that need clean up and attention
0 2012/02/22 09:55:21
new engine mount configuration
new engine mount configuration
0 2012/02/22 09:53:25
test fit
test fit
0 2012/02/22 09:53:25
just the same as a rx3
just the same as a rx3
0 2012/02/22 09:53:25
original crossmember after
original crossmember after
0 2012/02/22 09:50:56
need to make space for a decent size radiator
need to make space for a decent size radiator
0 2012/02/22 09:50:56
original crossmember before
original crossmember before
0 2012/02/22 09:50:56
no turning back now
no turning back now
0 2012/02/22 09:48:53