1989 Turbo II
mpcv2000
November 17, 2009
Up to date specifications as of March 2012:
-Shortblock :
-385CI ( 6.3L ) LT1 4 Bolt main Corvette shortblock.
-Scat 9000 stroked lightweight forged crank.
-Scat forged rods.
-Bored .040" over.
-Forged Pistons -5cc dish.
-4045MS-15 .040" .005" Mahle rings file to fit.
-Rings gap : 1st .018" , 2nd .020".
-ARP main studs.
-Melling 10555 High Volume Oil pump.
-Clevite 77 MS-909H STD bearings crank Bearings.
-Clevite 77 CB-663H STD Connecting rods bearings.
-12370835 GM single roller extreme duty timing chain set.
-Fluidampr Harmonic balancer # 740101.
-Balanced and Blueprinted.
-Lloyd Elliot LE2 package.
-Fully Ported heads milled 0.030" with 0.56cc chamber, casting 10128374.
Manley 2.00/1.56 6000 series valves.
PAC 1218 bee hive springs (145 lbs seat and 340 lbs open)
Steel retainers and locks.
205 cc intake port flow about 275/190 CFM.
-12.05:1 Comp. Ratio , 230PSI Compression.
-CompCams Pro-Magnum Roller rocker 1.6:1 7/16" studs "NSF" (None Self Aligned).
-850-16 CompCams Hi-energy hydrolic roller lifter.
-7937-16 CompCams Hi-Tech Pushrods 5/16"X7.050".
-MR-1896 Sealed Power 5/16" Guide Plate.
-Fully ported Intake manifold casting 12552138.
-AS&M 58mm Throttle body.
-Ford Racing SVO 30 Lbs. Injectors.
-Custom camshaft 223/230 .565/.565 112 LSA .
-Fel Pro 1074 head gaskets .039".
-Fel Pro 1284 intake gaskets.
-Autolite #104 0.030".
-Hypertech 160 degree thermostat.
-MSD 83811 Pro-Billet Distributor.
-MSD 8226 Blaster coil.
-MSD 32149 8.5mm Spark plug wires.
-TPIS High flow mass air sensor housing.
-Meziere WP118HD Electric Water Pump.
-Holley 255lph fuel pump.
-Hedman 69640 modified for Fastburn "D" style GM exhaust port to 2.5" into 3" N1 Pipe to Magnaflow Muffler.
-Ford Taurus V6 3.8L electric fan conversion.
-LT4 Knock module #16214681 with stock GM PCM (computer).
-D31A Optima Battery.
-Toyota MR2 Electric Power Steering pump conversion.
-Moroso Ford Mustang 05 power steering remote reservoir.
-Transmision T56 6 Speed.
-Fidanza #198581 12.5LBS flywheel.
-SPEC 3 "Pressure plate".
-Centerforce 381039 clutch disc.11" 26 splines.
-Ram BA381 HD clutch pilot Brg.
-GM OEM release Brg. 10085246 (CT1080).
-Pro 5.0 Short throw shifter.
-Dorman #31052 Pinion snubber
-Abbott Electronic speedo converter.
Limited slip 4.10 Differential.
-KAAZ LSD 1.5 Differential .
Suspension/Wheels
Stance GR Coilovers adjustable with front/rear pillowballs.
Racing Beat DTSS Elims.
K2RD Rear Camber Adjuster.
5Zigen FN01R-C 17x8 25 225/45/17 Nitto NeoGen.
5Zigen FN01R-C 17x10 35 275/40/17 Nitto 555R Drag R.
ARP rear 2.5" extended studs #100-7708 ( cut 1/2" ).
ARP Front 2.5" extended Studs # 100-7708.
VMS forged aluminum Open lug nuts 12X1.5mm.
Most of this tecnical informations are for personal reference but still interesting to know for some people.
-Shortblock :
-385CI ( 6.3L ) LT1 4 Bolt main Corvette shortblock.
-Scat 9000 stroked lightweight forged crank.
-Scat forged rods.
-Bored .040" over.
-Forged Pistons -5cc dish.
-4045MS-15 .040" .005" Mahle rings file to fit.
-Rings gap : 1st .018" , 2nd .020".
-ARP main studs.
-Melling 10555 High Volume Oil pump.
-Clevite 77 MS-909H STD bearings crank Bearings.
-Clevite 77 CB-663H STD Connecting rods bearings.
-12370835 GM single roller extreme duty timing chain set.
-Fluidampr Harmonic balancer # 740101.
-Balanced and Blueprinted.
-Lloyd Elliot LE2 package.
-Fully Ported heads milled 0.030" with 0.56cc chamber, casting 10128374.
Manley 2.00/1.56 6000 series valves.
PAC 1218 bee hive springs (145 lbs seat and 340 lbs open)
Steel retainers and locks.
205 cc intake port flow about 275/190 CFM.
-12.05:1 Comp. Ratio , 230PSI Compression.
-CompCams Pro-Magnum Roller rocker 1.6:1 7/16" studs "NSF" (None Self Aligned).
-850-16 CompCams Hi-energy hydrolic roller lifter.
-7937-16 CompCams Hi-Tech Pushrods 5/16"X7.050".
-MR-1896 Sealed Power 5/16" Guide Plate.
-Fully ported Intake manifold casting 12552138.
-AS&M 58mm Throttle body.
-Ford Racing SVO 30 Lbs. Injectors.
-Custom camshaft 223/230 .565/.565 112 LSA .
-Fel Pro 1074 head gaskets .039".
-Fel Pro 1284 intake gaskets.
-Autolite #104 0.030".
-Hypertech 160 degree thermostat.
-MSD 83811 Pro-Billet Distributor.
-MSD 8226 Blaster coil.
-MSD 32149 8.5mm Spark plug wires.
-TPIS High flow mass air sensor housing.
-Meziere WP118HD Electric Water Pump.
-Holley 255lph fuel pump.
-Hedman 69640 modified for Fastburn "D" style GM exhaust port to 2.5" into 3" N1 Pipe to Magnaflow Muffler.
-Ford Taurus V6 3.8L electric fan conversion.
-LT4 Knock module #16214681 with stock GM PCM (computer).
-D31A Optima Battery.
-Toyota MR2 Electric Power Steering pump conversion.
-Moroso Ford Mustang 05 power steering remote reservoir.
-Transmision T56 6 Speed.
-Fidanza #198581 12.5LBS flywheel.
-SPEC 3 "Pressure plate".
-Centerforce 381039 clutch disc.11" 26 splines.
-Ram BA381 HD clutch pilot Brg.
-GM OEM release Brg. 10085246 (CT1080).
-Pro 5.0 Short throw shifter.
-Dorman #31052 Pinion snubber
-Abbott Electronic speedo converter.
Limited slip 4.10 Differential.
-KAAZ LSD 1.5 Differential .
Suspension/Wheels
Stance GR Coilovers adjustable with front/rear pillowballs.
Racing Beat DTSS Elims.
K2RD Rear Camber Adjuster.
5Zigen FN01R-C 17x8 25 225/45/17 Nitto NeoGen.
5Zigen FN01R-C 17x10 35 275/40/17 Nitto 555R Drag R.
ARP rear 2.5" extended studs #100-7708 ( cut 1/2" ).
ARP Front 2.5" extended Studs # 100-7708.
VMS forged aluminum Open lug nuts 12X1.5mm.
Most of this tecnical informations are for personal reference but still interesting to know for some people.
