RX7Club.com - Mazda RX7 Forum
The Rear
The Rear
5 2009/08/04 20:52:29
The Side Skirts
The Side Skirts
8 2009/08/04 20:52:29
Sweet
Sweet
11 2009/08/04 20:52:29
This is my goal for my 3rd Gen .. Im in love with this kit & this is the look Im going for. The kit is a Ings N spec 2 Ill post pics when the work begins on the 3rd Gen
This is my goal for my 3rd Gen .. Im in love with this kit & this is the look Im going for. The kit is a Ings N spec 2 Ill post pics when the work begins on the 3rd Gen
10 2009/08/04 20:53:57
My Son & the FD
My Son & the FD
5 2009/08/04 20:53:57
Son again
Son again
5 2009/08/04 20:53:57
Me with the V-Power in the background
Me with the V-Power in the background
3 2009/08/04 20:58:25
Side
Side
6 2009/08/04 20:58:25
Current Engine bay Set up is as Follows: Built & Tuned by (Rolo) Central Florida Turbo. 315hp / 285 torque Street ported w/ 3mm Apex Seals 2) Aereomotive fuel pressure regulator 850 primary injectors & 1600 secondary injectors Racing pulleys 10 gauge spark plug cables 3 row koyo radiator 7) Greddy front mount intercooler w/ greddy elbow Boost is @ 13.5 pounds Apexi ECU w/ display screen Autometer boost, pyrometer, oil pressure, water temperature, air/fuel gauges 3" downpipe, midpipe, and Catback New stage 1 clutch Blitz BOV
Current Engine bay Set up is as Follows: Built & Tuned by (Rolo) Central Florida Turbo. 315hp / 285 torque Street ported w/ 3mm Apex Seals 2) Aereomotive fuel pressure regulator 850 primary injectors & 1600 secondary injectors Racing pulleys 10 gauge spark plug cables 3 row koyo radiator 7) Greddy front mount intercooler w/ greddy elbow Boost is @ 13.5 pounds Apexi ECU w/ display screen Autometer boost, pyrometer, oil pressure, water temperature, air/fuel gauges 3" downpipe, midpipe, and Catback New stage 1 clutch Blitz BOV
4 2009/08/04 20:58:25
The backside
The backside
46 2009/08/04 21:07:50
The Front
The Front
22 2009/08/04 21:07:50
NOPI Atlanta GA, finished, but still in Primer, didnt have time to finish, although this show was my goal. I was really happy with the way it turned out For anyone wondering, the side skirts are for a 95 Mitsubishi Eclipse
NOPI Atlanta GA, finished, but still in Primer, didnt have time to finish, although this show was my goal. I was really happy with the way it turned out For anyone wondering, the side skirts are for a 95 Mitsubishi Eclipse
26 2009/08/04 21:07:50
Custom RX7 plate I made Consists of pleiglass. Had the RX7 stickers cut in reverse, stock them to the back side of the plexi, sprayed it black, pealed the stickers off, placed mirror tape to the back panel behined the plexi, placed 4 red Varad LED's back there, then fiberglassed the plexi in place. Looks good lit up @ night..
Custom RX7 plate I made Consists of pleiglass. Had the RX7 stickers cut in reverse, stock them to the back side of the plexi, sprayed it black, pealed the stickers off, placed mirror tape to the back panel behined the plexi, placed 4 red Varad LED's back there, then fiberglassed the plexi in place. Looks good lit up @ night..
0 2009/08/04 21:10:21
Integra tail lights with a chopped Buddy Club rear bumer for an Accord fitted The gray corner flares you see are Veilside Rear under spoilers for a FD3 Notice I also had to fabricate pedestals for the wing
Integra tail lights with a chopped Buddy Club rear bumer for an Accord fitted The gray corner flares you see are Veilside Rear under spoilers for a FD3 Notice I also had to fabricate pedestals for the wing
36 2009/08/04 21:10:21
Starting Stage 2 Cutting up all that hard work for Integra tail light conversion
Starting Stage 2 Cutting up all that hard work for Integra tail light conversion
1 2009/08/04 21:10:21
Completed
Completed
5 2009/08/04 21:12:15
Finished
Finished
5 2009/08/04 21:12:15
Wet sanding, then buffing it out
Wet sanding, then buffing it out
0 2009/08/04 21:12:15
Spraying the body Black base with purple pearl in the clear
Spraying the body Black base with purple pearl in the clear
0 2009/08/04 21:13:32
Spraying the jams
Spraying the jams
0 2009/08/04 21:13:32
Final sanding & primer
Final sanding & primer
0 2009/08/04 21:13:32
Doing the glass work to mould the rear flares to the body
Doing the glass work to mould the rear flares to the body
0 2009/08/04 21:14:55
Shaving the rear bumper to be flush, while retaining the bumper
Shaving the rear bumper to be flush, while retaining the bumper
0 2009/08/04 21:14:55
Modifying the Mariah Wide Body Kit to have more curves & spraying the wheel Wells before instaling the Front Fenders
Modifying the Mariah Wide Body Kit to have more curves & spraying the wheel Wells before instaling the Front Fenders
0 2009/08/04 21:14:55
Bought the 85 GSL-SE in 1991 Began the work for stage 1 build in 1999 Striping it down
Bought the 85 GSL-SE in 1991 Began the work for stage 1 build in 1999 Striping it down
0 2009/08/04 21:17:27
My new Blitz wheels for the FD project. The taping begins for the color change..
My new Blitz wheels for the FD project. The taping begins for the color change..
2 2009/09/10 22:47:13
1st coat of Gold goes on
1st coat of Gold goes on
0 2009/09/10 22:47:13
2nd Coat all 4
2nd Coat all 4
0 2009/09/10 22:47:13
And the clear goes on.. If you notice, the gold looks lighter in this picture without Flash
And the clear goes on.. If you notice, the gold looks lighter in this picture without Flash
0 2009/09/10 22:50:36
This picture taken with Flash shows a brighter color. Thats because I used Gold Pearl in the clear to give it an added touch.
This picture taken with Flash shows a brighter color. Thats because I used Gold Pearl in the clear to give it an added touch.
0 2009/09/10 22:50:36
The final result.. The color is Star Gold Metalic with 3 coats of Clear with Gold Pearl added.. I think they turned out pretty good. And will look sexy on the red FD
The final result.. The color is Star Gold Metalic with 3 coats of Clear with Gold Pearl added.. I think they turned out pretty good. And will look sexy on the red FD
3 2009/09/10 22:50:36
Current Engine Bay with Cold Air Induction System, Pettit Stage 3 Intercooler & a few other goodies .. Currently running @ 380 HP
Current Engine Bay with Cold Air Induction System, Pettit Stage 3 Intercooler & a few other goodies .. Currently running @ 380 HP
1 2010/02/10 21:06:00
My sone with the Ole Skool Kicker 18's that goin in the 7 ..
My sone with the Ole Skool Kicker 18's that goin in the 7 ..
4 2010/02/20 22:04:01
The custom sub box, rear nins had to be removed for the air space meeded
The custom sub box, rear nins had to be removed for the air space meeded
0 2010/02/20 22:04:01
Shot of the Box from the back
Shot of the Box from the back
0 2010/02/20 22:04:01
Sub box with the front on
Sub box with the front on
0 2010/02/20 22:07:16
sub box8Side view of the box. It will have to be installed in 2 piecs then joined together, there isnt enough room to get it in thru the rear hatch with i like this. I know one thing, its gonna hit hard as hell. I will add more pictures as the build as the proress develops
sub box8Side view of the box. It will have to be installed in 2 piecs then joined together, there isnt enough room to get it in thru the rear hatch with i like this. I know one thing, its gonna hit hard as hell. I will add more pictures as the build as the proress develops
2 2010/02/20 22:07:16