RX7Club.com - Mazda RX7 Forum
The way I got her from Japan
The way I got her from Japan
3 2009/02/22 20:21:05
Cleared out all the stock IC Pipes and TT Intake Tubes
Cleared out all the stock IC Pipes and TT Intake Tubes
0 2009/02/22 20:21:05
Ready to start Cutting and fitting the universal IC pipe Kit. Step 1 was to drill a hole in the left side frame running by the headlight to run the IC pipe to the FMIC
Ready to start Cutting and fitting the universal IC pipe Kit. Step 1 was to drill a hole in the left side frame running by the headlight to run the IC pipe to the FMIC
0 2009/02/22 20:21:05
Fitting the FMIC with the Front Bumper on
Fitting the FMIC with the Front Bumper on
1 2009/02/22 20:24:43
Running the Piping to the FMIC with as little bends as possible. keep in mind im working with a universal piping kit, which was mostly planning how to run all the pipes and which pipes to use. The cutting and fitting was the easy part.
Running the Piping to the FMIC with as little bends as possible. keep in mind im working with a universal piping kit, which was mostly planning how to run all the pipes and which pipes to use. The cutting and fitting was the easy part.
0 2009/02/22 20:24:43
Finished running the piping to the Front mount, just waiting on 3" reducer elbows and a little more cutting of the 2 (L) pipes to finish it off.
Finished running the piping to the Front mount, just waiting on 3" reducer elbows and a little more cutting of the 2 (L) pipes to finish it off.
4 2009/02/22 20:24:43
Installed the GReddy Airnx System
Installed the GReddy Airnx System
0 2009/02/22 20:27:59
Greddy Compresstion Tube
Greddy Compresstion Tube
0 2009/02/22 20:27:59
Almost 20 hours of Work later, but here is the almsot finished product. (ask about custom ready made FMIC kits for your FD Exactly as in picture not including GReddy Intakes.)
Almost 20 hours of Work later, but here is the almsot finished product. (ask about custom ready made FMIC kits for your FD Exactly as in picture not including GReddy Intakes.)
2 2009/02/22 20:27:59
Fitting the 18x9 Kakimoto's after rolling the fender. might need some more.
Fitting the 18x9 Kakimoto's after rolling the fender. might need some more.
0 2009/02/22 20:31:58
Interior shot after changing the seats. Now I can actually fit in the car comfortably after making custom brackets that are pretty much on floor level and about 4 inches further back.
Interior shot after changing the seats. Now I can actually fit in the car comfortably after making custom brackets that are pretty much on floor level and about 4 inches further back.
2 2009/02/22 20:31:58
0 2009/02/22 20:31:58
1 2009/02/22 20:35:50
DSC01876
DSC01876
0 2009/02/22 20:35:50
Finished running the right IC pipes just have to finish the left, and run the U shaped pipe through the drilled 3" hole in the frame walls. (2 separate wallas are cut)
Finished running the right IC pipes just have to finish the left, and run the U shaped pipe through the drilled 3" hole in the frame walls. (2 separate wallas are cut)
0 2009/02/22 20:35:50