RX7Club.com - Mazda RX7 Forum
1 2020/10/07 20:46:11
0 2020/12/18 15:08:55
0 2020/12/18 15:09:10
0 2020/12/18 15:09:15
After getting the car the first thing they did was check compression...it wasn't good, so they pulled the motor. After Chris delivered the bad news, I thought you know maybe its a blessing in disguise, lets go ahead and do a streetport while its being rebuilt. I have a TO4R turbo that is going on the car so I figured the porting would open it up more. My goal is 400-450 rwhp. We believe this is very achievable on a conservative tune.
After getting the car the first thing they did was check compression...it wasn't good, so they pulled the motor. After Chris delivered the bad news, I thought you know maybe its a blessing in disguise, lets go ahead and do a streetport while its being rebuilt. I have a TO4R turbo that is going on the car so I figured the porting would open it up more. My goal is 400-450 rwhp. We believe this is very achievable on a conservative tune.
0 2020/12/18 15:12:47
The bay cleaned up really well
The bay cleaned up really well
0 2020/12/18 15:13:01
0 2020/12/18 15:13:05
I ordered a few products from LRB Speed as they are well spoken for on this forum. These will be powder coated in wrinkle black.
I ordered a few products from LRB Speed as they are well spoken for on this forum. These will be powder coated in wrinkle black.
0 2020/12/18 15:19:03
0 2020/12/18 15:19:09
Another great product from LRB Speed. I went with a flat door panel as I knew the seats going in the car had large shoulder bolsters and I would need more room. These are being powder coated wrinkle black as well.
Another great product from LRB Speed. I went with a flat door panel as I knew the seats going in the car had large shoulder bolsters and I would need more room. These are being powder coated wrinkle black as well.
0 2020/12/18 15:19:12
My seats are Sparco Pro2000's as they are one of the few fixed back seats that are comfortable and also can pass FIA tech but they are wide and tall. Had a little hick up trying to go with sliders and side mounted. The seat was on the roof
My seats are Sparco Pro2000's as they are one of the few fixed back seats that are comfortable and also can pass FIA tech but they are wide and tall. Had a little hick up trying to go with sliders and side mounted. The seat was on the roof
0 2020/12/18 15:23:13
CJ is sitting in the car and you can really see how high they are with that mounting.(yes the car is dirty but she hasn't been fully detailed and preped before paint yet)
CJ is sitting in the car and you can really see how high they are with that mounting.(yes the car is dirty but she hasn't been fully detailed and preped before paint yet)
0 2020/12/18 15:23:20
Shoulder bolsters were so wide the door wouldn't close even with the LRB door panels
Shoulder bolsters were so wide the door wouldn't close even with the LRB door panels
0 2020/12/18 15:23:34
0 2020/12/18 15:28:18
Had to take off the sliders and do a bottom mount to get the seats to fit properly
Had to take off the sliders and do a bottom mount to get the seats to fit properly
0 2020/12/18 15:28:25
I like know Sparco isn't JDM but I do like how they look in the car and they really hold you firm in the seat from my experience with them in my EVO
I like know Sparco isn't JDM but I do like how they look in the car and they really hold you firm in the seat from my experience with them in my EVO
0 2020/12/18 15:28:33
So my concern was using a 6 point harness during track days and the lack of products on the market that can function as a harness bar so this is what the guys at Driver Motorsports came up with.
So my concern was using a 6 point harness during track days and the lack of products on the market that can function as a harness bar so this is what the guys at Driver Motorsports came up with.
0 2020/12/18 15:30:57
Here is how the sides are mounted to the car
Here is how the sides are mounted to the car
0 2020/12/18 15:31:03
I know Sparcos are not JDM but I do like how they look in the car and I love the feel of these seats, how they hold you in the car and how comfortable they are
I know Sparcos are not JDM but I do like how they look in the car and I love the feel of these seats, how they hold you in the car and how comfortable they are
0 2020/12/18 15:34:51
I know Sparcos aren't JDM but I do like the way they look in the car and I love the way these seats hold you in the car and how comfortable they are
I know Sparcos aren't JDM but I do like the way they look in the car and I love the way these seats hold you in the car and how comfortable they are
0 2020/12/18 15:40:52
Had to eventually take out the sliders and side mount and go with a fixed bottom mount to get the seats to fit in the car
Had to eventually take out the sliders and side mount and go with a fixed bottom mount to get the seats to fit in the car
0 2020/12/18 15:40:56
I was concerned with being able to properly use my 6 point harness without a harness bar and the lack of harness bars on the market that can pass tech, so this is what they came up with. This will be sprayed with a satin black
I was concerned with being able to properly use my 6 point harness without a harness bar and the lack of harness bars on the market that can pass tech, so this is what they came up with. This will be sprayed with a satin black
0 2020/12/18 15:41:02
Here is how it is being mounted in the car. This is getting a satin black finish
Here is how it is being mounted in the car. This is getting a satin black finish
0 2020/12/18 15:41:14
0 2021/01/01 07:39:31