RX7Club.com - Mazda RX7 Forum
0 2020/09/11 22:18:39
0 2020/09/11 22:18:44
0 2020/09/13 01:14:00
0 2020/09/13 01:14:06
0 2020/09/13 01:14:13
0 2020/09/20 20:42:25
0 2020/09/20 20:42:34
This is from the fd
This is from the fd
0 2020/11/24 09:42:28
Also fd
Also fd
0 2020/11/24 09:42:32
Supra
Supra
0 2020/11/24 09:42:36
Supra
Supra
0 2020/11/24 09:42:43
What exhaust is this?
What exhaust is this?
0 2020/12/15 23:44:43
And this? Is it this same trust exhaust??
And this? Is it this same trust exhaust??
0 2020/12/15 23:44:54
0 2020/12/15 23:45:03
0 2020/12/15 23:46:57
0 2020/12/15 23:47:07
0 2020/12/15 23:47:15
0 2020/12/30 22:43:05
0 2020/12/30 22:43:09
0 2021/01/04 21:49:37
0 2021/02/24 00:40:31
0 2021/02/24 00:40:38
0 2021/02/24 00:41:37
Engine bay as is currently
Engine bay as is currently
0 2021/02/25 21:40:49
Just got some fikse fm5 on the fd
Just got some fikse fm5 on the fd
1 2021/02/25 21:40:56
Eventually I’d like to sandblast or take off the yellow paint off of the wheels..
Eventually I’d like to sandblast or take off the yellow paint off of the wheels..
0 2021/02/25 21:41:03
0 2021/09/18 09:19:01
0 2021/09/18 09:19:07
0 2021/09/19 09:23:11
0 2021/09/19 09:23:14
0 2021/09/19 09:23:16
0 2022/07/16 14:52:42
0 2022/07/16 14:52:52
0 2022/07/16 14:53:05
0 2022/07/16 14:53:13
Is this the right orientation? It would seem with the circular raised bevels (the bearing would sit on it)? But in the directions it says the pineapple racing logo should face the front?? Then that would make this raised circular bevel face the back..
Is this the right orientation? It would seem with the circular raised bevels (the bearing would sit on it)? But in the directions it says the pineapple racing logo should face the front?? Then that would make this raised circular bevel face the back..
0 2022/07/16 14:57:41
So got everything on there. The small Allen bolt right side of bracket is easily stripped and unfortunately stripped on me. Would recommend to find and use a regular stainless bolt m6-1.0-30mm
So got everything on there. The small Allen bolt right side of bracket is easily stripped and unfortunately stripped on me. Would recommend to find and use a regular stainless bolt m6-1.0-30mm
0 2022/07/16 14:57:45
On the pulley bracket There is a little space where the stud goes into the water pump. I wanted to let it sit flush so I added a washer. Used the supplied long bolt (to replace the stock stud and nut) but as you can see the bolt head is hitting touching the water pump pulley (blue)…
On the pulley bracket There is a little space where the stud goes into the water pump. I wanted to let it sit flush so I added a washer. Used the supplied long bolt (to replace the stock stud and nut) but as you can see the bolt head is hitting touching the water pump pulley (blue)…
0 2022/07/16 14:57:49
0 2022/07/16 14:57:54
0 2022/07/16 14:57:58