Who sells front clear signal lenses for the FD?
Who sells front clear signal lenses for the FD?
Banned. I got OWNED!!!
Joined: Feb 2001
Posts: 2,158
Likes: 2
From: Bay Area, CA
Z06 powered FD
Joined: Mar 2001
Posts: 1,883
Likes: 0
From: Dallas, Texas
Rotary Freak
Joined: Mar 2001
Posts: 1,564
Likes: 1
From: Wichita, KS, USA
or you can make them yourself.
All you have to do is:
1. heat them up with a heatgun or in the oven (I actually used a hairdrier).
2.Then pry them open. Once its open you'll see that the amber piece is held on by one screw.
3. Remove the amber piece
4. Slap it all back together and seal it with some silicon sealant or something like that.
Heres a pic of mine.
All you have to do is:
1. heat them up with a heatgun or in the oven (I actually used a hairdrier).
2.Then pry them open. Once its open you'll see that the amber piece is held on by one screw.
3. Remove the amber piece
4. Slap it all back together and seal it with some silicon sealant or something like that.
Heres a pic of mine.
Banned. I got OWNED!!!
Joined: Feb 2001
Posts: 2,158
Likes: 2
From: Bay Area, CA
Originally posted by Zoomspeed
or you can make them yourself.
All you have to do is:
1. heat them up with a heatgun or in the oven (I actually used a hairdrier).
2.Then pry them open. Once its open you'll see that the amber piece is held on by one screw.
3. Remove the amber piece
4. Slap it all back together and seal it with some silicon sealant or something like that.
Heres a pic of mine.
or you can make them yourself.
All you have to do is:
1. heat them up with a heatgun or in the oven (I actually used a hairdrier).
2.Then pry them open. Once its open you'll see that the amber piece is held on by one screw.
3. Remove the amber piece
4. Slap it all back together and seal it with some silicon sealant or something like that.
Heres a pic of mine.
