Got a DECENT motor for my 10AE! 400HP!
04-01-03, 12:24 AM
#1
Got a DECENT motor for my 10AE! 400HP!
Well, let's just say... **** this complicated rotary ****. I spoke with some people this past week, and got me a real motor. The guy is hooking me up, it's only going to cost me $2k. Not bad for 400hp! Three Hundred and fifty cubic inches of POWER in my lovely MINT 10th anniverserry.
I spoke to my uncle, He says he can make it fit without cutting up the car too much! Might have to modify the hood a little but eh, oh well! at least it'll be fast!
Only 1500 made, and now one will have some real power.
Weight distribute this!
I spoke to my uncle, He says he can make it fit without cutting up the car too much! Might have to modify the hood a little but eh, oh well! at least it'll be fast!
Only 1500 made, and now one will have some real power.
Weight distribute this!
Last edited by Terrh; 04-01-03 at 12:28 AM.
04-01-03, 12:26 AM
#2
Super Raterhater
iTrader: (6)
Join Date: Dec 2001
Location: NY, MA, MI, OR, TX, and now LA or AZ!
Posts: 10,624
Likes: 0
Received 2 Likes
on
2 Posts
uh oh, just to warn you people here aren't very friendly towards v8 conversions. I'd like to see some pics of your progress/etc. What tranny do you plan to use?
LOL
Trending Topics
04-01-03, 12:50 AM
#12
Senior Member
Join Date: Oct 2002
Location: Driver's Seat
Posts: 333
Likes: 0
Received 0 Likes
on
0 Posts
What a waste of a car! Might as well haul that thing to a junker after that conversion is done!!!! If you wanted a 350 with a 3 speed auto get an older MUSCLE CAR! Why wreck such a peice of artwork and beauty as is the RX-7?!
(and as someone said earlier....please say April Fools!?!?)
(and as someone said earlier....please say April Fools!?!?)
04-01-03, 01:19 AM
#16
Full Member
Join Date: Oct 2002
Location: North Alabama
Posts: 136
Likes: 0
Received 0 Likes
on
0 Posts
Terrh-
Are you that much of a rotor hater? I've had my '87 TII since almost new. On it's last rotary motor (1 of 3), it spanked the hell out of a '98 'Vette- auto, in the 1/4.
Ironically, it now has an '00 'Vette motor.
However, lets see some pics of the car and engine together. Or maybe some posts on the 'V8RX7' forum?
Sounds like you're just trying to **** people off.....
I'm wrong, correct?!
Are you that much of a rotor hater? I've had my '87 TII since almost new. On it's last rotary motor (1 of 3), it spanked the hell out of a '98 'Vette- auto, in the 1/4.
Ironically, it now has an '00 'Vette motor.
However, lets see some pics of the car and engine together. Or maybe some posts on the 'V8RX7' forum?
Sounds like you're just trying to **** people off.....
I'm wrong, correct?!
oh well its your car do what you wish... at least its still gonna be on the road
04-01-03, 02:47 AM
#21
Full Member
Join Date: May 2002
Location: California
Posts: 136
Likes: 0
Received 0 Likes
on
0 Posts
*sniff* *sniff*
Smells like bullshit to me. Yeah right, like you're gonna scrap a "MINT" 10th anniv. 7 to get more power, and with a V8 and auto tranny at that!? B-U-L-L-S-H-I-T. You gotta be smarter than that? If not, then good luck and hope it all turns out good
Smells like bullshit to me. Yeah right, like you're gonna scrap a "MINT" 10th anniv. 7 to get more power, and with a V8 and auto tranny at that!? B-U-L-L-S-H-I-T. You gotta be smarter than that? If not, then good luck and hope it all turns out good
04-01-03, 04:02 AM
#22
Super Raterhater
iTrader: (6)
Join Date: Dec 2001
Location: NY, MA, MI, OR, TX, and now LA or AZ!
Posts: 10,624
Likes: 0
Received 2 Likes
on
2 Posts
Originally posted by FCdemon
good move there. take out a turbocharged 5-speed rotary and throw in a giant V8 with an auto tranny from a truck
good move there. take out a turbocharged 5-speed rotary and throw in a giant V8 with an auto tranny from a truck
Serpentine, if you would, try not to insult someone's intelligence just because you don't agree with them.
04-01-03, 05:30 AM
#23
Senior Member
Join Date: Apr 2002
Location: Washington State
Posts: 391
Likes: 0
Received 0 Likes
on
0 Posts
Re: Got a DECENT motor for my 10AE! 400HP!
Originally posted by Terrh
Well, let's just say... **** this complicated rotary ****. I spoke with some people this past week, and got me a real motor. The guy is hooking me up, it's only going to cost me $2k. Not bad for 400hp! Three Hundred and fifty cubic inches of POWER in my lovely MINT 10th anniverserry.
I spoke to my uncle, He says he can make it fit without cutting up the car too much! Might have to modify the hood a little but eh, oh well! at least it'll be fast!
Only 1500 made, and now one will have some real power.
Weight distribute this!
Well, let's just say... **** this complicated rotary ****. I spoke with some people this past week, and got me a real motor. The guy is hooking me up, it's only going to cost me $2k. Not bad for 400hp! Three Hundred and fifty cubic inches of POWER in my lovely MINT 10th anniverserry.
I spoke to my uncle, He says he can make it fit without cutting up the car too much! Might have to modify the hood a little but eh, oh well! at least it'll be fast!
Only 1500 made, and now one will have some real power.
Weight distribute this!
******* retard ...
not to mention he only posted that to get everyone all worked up. Notice how he uses a 10ae in MINT condition? The emphesis on 10ae and the condition of it point to him being full of ****... in which case he is still a retard.
Last edited by SideWindeRx7; 04-01-03 at 05:32 AM.
04-01-03, 05:51 AM
#24
Super Raterhater
iTrader: (6)
Join Date: Dec 2001
Location: NY, MA, MI, OR, TX, and now LA or AZ!
Posts: 10,624
Likes: 0
Received 2 Likes
on
2 Posts
Enough with the flames, just because you don't agree with he's doing doesn't make what he's doing retarded or so forth. It's his car, he's free to do what he wants to it. If you think he's a troll, then why the hell are you falling for it?
