Power FC Forum Apex Power FC Support and Questions.

Power FC FC Tune preview

Thread Tools
 
Search this Thread
 
Old 02-16-06 | 11:30 PM
  #331  
Cubes's Avatar
3.0TDI

 
Joined: Sep 2005
Posts: 36
Likes: 0
From: Australia
I am still interested, always have been.

Fasthatch, how were the scans of the rb20det pfc I sent you a while back?
I am guessing its still not scanning correctly.
Old 02-18-06 | 09:22 AM
  #332  
FastHatch's Avatar
Thread Starter
Senior Member

 
Joined: Feb 2005
Posts: 427
Likes: 0
From: Germany
Originally Posted by Cubes
I am still interested, always have been.

Fasthatch, how were the scans of the rb20det pfc I sent you a while back?
I am guessing its still not scanning correctly.
Just looked through my emails, the scan for the RB20DET 2.32B was succesful.
0.53 and 0.54 worked both.

I'll get back to you soon.
André
Old 02-18-06 | 12:21 PM
  #333  
MichaelB145's Avatar
www.mancavecolorado.com
 
Joined: Jun 2003
Posts: 1,661
Likes: 1
From: Lakewood Colorado
I would pay more than $200 to get one of the 1st completed units!
Old 02-18-06 | 06:57 PM
  #334  
subyfiles's Avatar
Junior Member

 
Joined: Nov 2004
Posts: 36
Likes: 0
From: Istanbul
Fasthatch, keep the good work!

Have you ever checkout aem's software? It has very user friendly functions especially when setting the scalings of the things. Personally I wish smoothing the values by using my mouse on a curve.
Old 02-18-06 | 09:34 PM
  #335  
JLee's Avatar
Full Member
iTrader: (1)
 
Joined: Oct 2003
Posts: 122
Likes: 0
From: Northeast, MA
Thumbs up

Andre you're doing a wonderful job with this software, I've been keeping track of this since you started and I'm eagerly waiting for the finish product. I'm holding off on buying the datalogit because I rather have your products. Thanks keep up the good work
Old 02-18-06 | 09:36 PM
  #336  
MichaelB145's Avatar
www.mancavecolorado.com
 
Joined: Jun 2003
Posts: 1,661
Likes: 1
From: Lakewood Colorado
If I already own a datalogit....will this intergrate with it?
Old 02-18-06 | 09:46 PM
  #337  
paulr33's Avatar
Full Member

 
Joined: Jun 2005
Posts: 130
Likes: 0
From: melbourne / australia
Originally Posted by FastHatch
Just looked through my emails, the scan for the RB20DET 2.32B was succesful.
0.53 and 0.54 worked both.

I'll get back to you soon.
André
Did you see my rb25det one I uploaded on the previous page?
It was for rb25det powerfc. 5.11 fc
Old 02-19-06 | 10:44 AM
  #338  
SomeGuy_sg's Avatar
Senior Member
 
Joined: Dec 2002
Posts: 556
Likes: 1
From: singapore
Just stumbled on to this thread. Wow is all i can say now. It is great to see that a man is will to make a difference to something. I do have a few questions thou.
Will the box have USB connectivity?
How will the map be tuned ? By VE like autronic's ecu ?

Oh and of course keep up the great work
Old 02-20-06 | 01:24 PM
  #339  
Xeros's Avatar
I'm sorry wha?
 
Joined: Aug 2003
Posts: 1,098
Likes: 1
From: Wisconsin
So when is the next release coimg out....or do we have to pay for that one?
Old 02-20-06 | 03:39 PM
  #340  
Speedworks's Avatar
Rotary Freak
 
Joined: Jan 2004
Posts: 1,890
Likes: 4
From: Belgium
Still very interested as I was on the lookout for a Datalogit unit but now postponing untill this piece of work is coming out for FD3S.

200$ for the connector unit is well within range...

Thumbs up
Old 02-21-06 | 05:31 AM
  #341  
FastHatch's Avatar
Thread Starter
Senior Member

 
Joined: Feb 2005
Posts: 427
Likes: 0
From: Germany
Originally Posted by Xeros
....or do we have to pay for that one?
No, it will always be free. Promised

The monitoring features are not yet completly implemented and i need to intensely test it too before i release it.
Old 02-21-06 | 09:54 AM
  #342  
forcefed1's Avatar
Senior Member
 
Joined: Nov 2001
Posts: 674
Likes: 0
From: Lynchburg, VA
I'm not finding any place to download the latest version. is there an older one I can play with?

I don't get it WHY are you doing this?
You never mention using it for money and you put an enormous amount of time and effort into it. Are you using this program as a resume builder? Of course you don't have to answer this question but I am curious.

From what I have seen it's going to be better than any other software I have tuned with before. Congratulations!
If you have a minute. Can you run over the features of the box you are building? It sounds like it will have more capabilities than the current datalogit offerings.
Thanks for all the hard work!
Greg
Old 02-21-06 | 11:12 AM
  #343  
subyfiles's Avatar
Junior Member

 
Joined: Nov 2004
Posts: 36
Likes: 0
From: Istanbul
I don't get it WHY are you doing this?
Some people love to build something new, some loves to use it. Most of the posts to this thread is about the respect to his work so it should be a pleasure for him. Moreover, it is good experience for him to understand the EMS and can use it in his portfolio for future.
Old 02-23-06 | 09:04 AM
  #344  
FastHatch's Avatar
Thread Starter
Senior Member

 
Joined: Feb 2005
Posts: 427
Likes: 0
From: Germany
Originally Posted by forcefed1
I'm not finding any place to download the latest version. is there an older one I can play with?
The links for v0.51, 0.52, 0.53, 0.54 and 0.54a are still working.


Originally Posted by forcefed1
I don't get it WHY are you doing this?
You never mention using it for money and you put an enormous amount of time and effort into it. Are you using this program as a resume builder? Of course you don't have to answer this question but I am curious.
When i had bought my Datalogit 2 years ago to tune my Civic i wasn't really happy with the software. It wasn't easy to get up to speed with it, there was no documentation, many settings have no units, some values are even displayed in a raw format (Inj vs Accel TPS, Input / Settings for example). You can then either start to complain about it or if you have the possibilities make something better. End of 2004 i then started to make my own application because competition is always a good thing. And the software is free because i don't want anyone who has already purchased a Datalogit to pay twice.


Originally Posted by forcefed1
If you have a minute. Can you run over the features of the box you are building? It sounds like it will have more capabilities than the current datalogit offerings.
Thanks for all the hard work!
I'll post some pics of the board next week.


Those who are interested in the technical background, i've stripped the model descriptions from the source code and put them into XML files. FC Tune needs some infos about each model, which channels does it have, which sensors, how to communicate with the PFC, which settings does it support. It was ok to have these in the source code when only VTEC and FD3S models were supported, but so far i have 179 different PFC models on my list
I don't know the total number but i guess around 200.



If you want support support for a certain model, please drop me a PM, first come first serve.
Old 02-23-06 | 10:05 AM
  #345  
FastHatch's Avatar
Thread Starter
Senior Member

 
Joined: Feb 2005
Posts: 427
Likes: 0
From: Germany
It'd be cool if someone could make icons for the following settings:

- Rev/Idle
- Boost Control
- Sequential turbo
- o2 feedback (Closed loop)

These are the icons from the FC Pro software:



(Right click, save as, to download bitmap)

The icons may look similiar.

The icons must have a width of 16 pixels and a height of 15 pixels.


Quick Reply: Power FC FC Tune preview



All times are GMT -5. The time now is 06:30 PM.