GB: Spirit-R Key!
#277
IB Staff
wow. First off, I would like to apologize to each and every one of you who hasn't been taken care of by Ramy.
I am going to attempt to clear this issue up. In order to do that, can I please have a list of names of people who have paid, but not received their key yet. This also goes for people who got less than what they paid for.
Thanks in advance.
1.
2.
3.
4.
5.
6.
7.
I am going to attempt to clear this issue up. In order to do that, can I please have a list of names of people who have paid, but not received their key yet. This also goes for people who got less than what they paid for.
Thanks in advance.
1.
2.
3.
4.
5.
6.
7.
#278
SideWayZ The Only Way
iTrader: (11)
1. FD3S2005
2.
3.
4.
5.
6.
7.
Got my 4 keys, 2 of which were cut weren't 100% so when i tried it it kinda got stuck and it got a little bent as i got it out.. the other one was the same but i went to try and get it re-cut it works now but its not smooth at all and still has a little trouble. the other 2 are blank i wanted to save so i dont have a problem with thos 2
2.
3.
4.
5.
6.
7.
Got my 4 keys, 2 of which were cut weren't 100% so when i tried it it kinda got stuck and it got a little bent as i got it out.. the other one was the same but i went to try and get it re-cut it works now but its not smooth at all and still has a little trouble. the other 2 are blank i wanted to save so i dont have a problem with thos 2
#280
dorito powered
iTrader: (5)
Join Date: Mar 2008
Location: Lincoln, NE
Posts: 2,839
Likes: 0
Received 0 Likes
on
0 Posts
1. FD3S2005
2. KKMpunkrock2011
3.
4.
5.
6.
7.
paid for 1 black key, nothing special, not even cut. I paid in full in June or July of 08.
the powers that be may also want to move the part from post 276 at least to a new thread that ramy doesn't have control of as he has deleted posts in the past.
2. KKMpunkrock2011
3.
4.
5.
6.
7.
paid for 1 black key, nothing special, not even cut. I paid in full in June or July of 08.
the powers that be may also want to move the part from post 276 at least to a new thread that ramy doesn't have control of as he has deleted posts in the past.
#281
Hey guys
Sorry I've had trouble logging in for quite a while now. Not sure what the prob was. I suspect it was a billing issue I was dealing w/ with someone over & IB (the site owners), and the person I was talking to up & disappeared (phone #, extension, and email is gone from their directory). So I'm still sorting that out (Robb M., I'd appreciate some help in that aspect). The good news is, I'm able to log in and post now...so hopefully it'll last.
1. For those who had issues w/ their keys...I want to assure ya that the keys were VIN Cut BY MAZDA. And it seems like only 1 or 2 ppl had a prob w/ their VIN-cut keys. The only scenarios that I can imagine are:
- A) The VIN you supplied was wrong
- B) The VIN you supplied is right, BUT the lock cylinders on your car have been changed at some point (possibly prior to your ownership)
- C) The VIN you supplied is right, the lock cylinder matches, but the cylinder + your original key have had enough wear & tear that the new VIN-cut key needs to be filed down some to work properly.
If none of those are the cases, I'd be really surprised, as I've VIN cut DOZENS of keys in this and the previous GB w/o any problems (except the above mentioned ones) - but we'll need to figure this out either way. So check the 3 issues above plz, and let me know, and we'll get this taken care of immediately.
For those still awaiting their keys...
- FD3S2005, yours went out a WHILE back. I'm not sure what happened; they went out w/ the rest of the VIN cut keys. Everyone received 'em except you. Lemme see if I can get a tracking # on it.
- KKMpunkrock2011, I thought we had reached an agreement re: the iTrader thingy. Did you ever get to the bottom of that? Cuz no change was made on my end.
- Joe Castro, I never received the balance of your payment, so I'm still holding onto your keys
- smblue1985, emailed you back.
Anyone else have any issues that need to be taken care of? Lets get this done & over w/ ASAP.
Thanks,
~Ramy
Sorry I've had trouble logging in for quite a while now. Not sure what the prob was. I suspect it was a billing issue I was dealing w/ with someone over & IB (the site owners), and the person I was talking to up & disappeared (phone #, extension, and email is gone from their directory). So I'm still sorting that out (Robb M., I'd appreciate some help in that aspect). The good news is, I'm able to log in and post now...so hopefully it'll last.
1. For those who had issues w/ their keys...I want to assure ya that the keys were VIN Cut BY MAZDA. And it seems like only 1 or 2 ppl had a prob w/ their VIN-cut keys. The only scenarios that I can imagine are:
- A) The VIN you supplied was wrong
- B) The VIN you supplied is right, BUT the lock cylinders on your car have been changed at some point (possibly prior to your ownership)
- C) The VIN you supplied is right, the lock cylinder matches, but the cylinder + your original key have had enough wear & tear that the new VIN-cut key needs to be filed down some to work properly.
If none of those are the cases, I'd be really surprised, as I've VIN cut DOZENS of keys in this and the previous GB w/o any problems (except the above mentioned ones) - but we'll need to figure this out either way. So check the 3 issues above plz, and let me know, and we'll get this taken care of immediately.
For those still awaiting their keys...
- FD3S2005, yours went out a WHILE back. I'm not sure what happened; they went out w/ the rest of the VIN cut keys. Everyone received 'em except you. Lemme see if I can get a tracking # on it.
- KKMpunkrock2011, I thought we had reached an agreement re: the iTrader thingy. Did you ever get to the bottom of that? Cuz no change was made on my end.
- Joe Castro, I never received the balance of your payment, so I'm still holding onto your keys
- smblue1985, emailed you back.
Anyone else have any issues that need to be taken care of? Lets get this done & over w/ ASAP.
Thanks,
~Ramy
#284
watashi no shichi
iTrader: (4)
Hey guys
Sorry I've had trouble logging in for quite a while now. Not sure what the prob was. I suspect it was a billing issue I was dealing w/ with someone over & IB (the site owners), and the person I was talking to up & disappeared (phone #, extension, and email is gone from their directory). So I'm still sorting that out (Robb M., I'd appreciate some help in that aspect). The good news is, I'm able to log in and post now...so hopefully it'll last.
1. For those who had issues w/ their keys...I want to assure ya that the keys were VIN Cut BY MAZDA. And it seems like only 1 or 2 ppl had a prob w/ their VIN-cut keys. The only scenarios that I can imagine are:
- A) The VIN you supplied was wrong
- B) The VIN you supplied is right, BUT the lock cylinders on your car have been changed at some point (possibly prior to your ownership)
- C) The VIN you supplied is right, the lock cylinder matches, but the cylinder + your original key have had enough wear & tear that the new VIN-cut key needs to be filed down some to work properly.
If none of those are the cases, I'd be really surprised, as I've VIN cut DOZENS of keys in this and the previous GB w/o any problems (except the above mentioned ones) - but we'll need to figure this out either way. So check the 3 issues above plz, and let me know, and we'll get this taken care of immediately.
For those still awaiting their keys...
- FD3S2005, yours went out a WHILE back. I'm not sure what happened; they went out w/ the rest of the VIN cut keys. Everyone received 'em except you. Lemme see if I can get a tracking # on it.
- KKMpunkrock2011, I thought we had reached an agreement re: the iTrader thingy. Did you ever get to the bottom of that? Cuz no change was made on my end.
- Joe Castro, I never received the balance of your payment, so I'm still holding onto your keys
- smblue1985, emailed you back.
Anyone else have any issues that need to be taken care of? Lets get this done & over w/ ASAP.
Thanks,
~Ramy
Sorry I've had trouble logging in for quite a while now. Not sure what the prob was. I suspect it was a billing issue I was dealing w/ with someone over & IB (the site owners), and the person I was talking to up & disappeared (phone #, extension, and email is gone from their directory). So I'm still sorting that out (Robb M., I'd appreciate some help in that aspect). The good news is, I'm able to log in and post now...so hopefully it'll last.
1. For those who had issues w/ their keys...I want to assure ya that the keys were VIN Cut BY MAZDA. And it seems like only 1 or 2 ppl had a prob w/ their VIN-cut keys. The only scenarios that I can imagine are:
- A) The VIN you supplied was wrong
- B) The VIN you supplied is right, BUT the lock cylinders on your car have been changed at some point (possibly prior to your ownership)
- C) The VIN you supplied is right, the lock cylinder matches, but the cylinder + your original key have had enough wear & tear that the new VIN-cut key needs to be filed down some to work properly.
If none of those are the cases, I'd be really surprised, as I've VIN cut DOZENS of keys in this and the previous GB w/o any problems (except the above mentioned ones) - but we'll need to figure this out either way. So check the 3 issues above plz, and let me know, and we'll get this taken care of immediately.
For those still awaiting their keys...
- FD3S2005, yours went out a WHILE back. I'm not sure what happened; they went out w/ the rest of the VIN cut keys. Everyone received 'em except you. Lemme see if I can get a tracking # on it.
- KKMpunkrock2011, I thought we had reached an agreement re: the iTrader thingy. Did you ever get to the bottom of that? Cuz no change was made on my end.
- Joe Castro, I never received the balance of your payment, so I'm still holding onto your keys
- smblue1985, emailed you back.
Anyone else have any issues that need to be taken care of? Lets get this done & over w/ ASAP.
Thanks,
~Ramy
Ramy, thank you for posting a response addressing the most recent concerns.
Last edited by Robb M.; 03-30-10 at 11:10 AM.
#286
SideWayZ The Only Way
iTrader: (11)
let me correct what up with mine
1. FD3S2005 Keys werent cut like original, going to check something tho first
2. KKMpunkrock2011
3. Jdmrxluver (my old user name)
4.
5.
6.
7.
Ramy i only received one red key instead of 2? Jdmrxluver was the user name i when by at the time i appreciate it
1. FD3S2005 Keys werent cut like original, going to check something tho first
2. KKMpunkrock2011
3. Jdmrxluver (my old user name)
4.
5.
6.
7.
Ramy i only received one red key instead of 2? Jdmrxluver was the user name i when by at the time i appreciate it
#287
Junior Member
Join Date: Feb 2008
Location: Vancouver
Posts: 17
Likes: 0
Received 0 Likes
on
0 Posts
I got an email from paypal with traction number and stuff, but when I go on USPS website and type in the # it says it doesn't exist.
1. FD3S2005 Keys werent cut like original, going to check something tho first
2. KKMpunkrock2011
3. Jdmrxluver (my old user name)
4. Tyburn
5.
6.
7.
1. FD3S2005 Keys werent cut like original, going to check something tho first
2. KKMpunkrock2011
3. Jdmrxluver (my old user name)
4. Tyburn
5.
6.
7.
#290
Lives on the Forum
iTrader: (126)
u cant track with usps...only confirm delivery
I got an email from paypal with traction number and stuff, but when I go on USPS website and type in the # it says it doesn't exist.
1. FD3S2005 Keys werent cut like original, going to check something tho first
2. KKMpunkrock2011
3. Jdmrxluver (my old user name)
4. Tyburn
5.
6.
7.
1. FD3S2005 Keys werent cut like original, going to check something tho first
2. KKMpunkrock2011
3. Jdmrxluver (my old user name)
4. Tyburn
5.
6.
7.
#292
IB Staff
What can I do?
#293
Engage
iTrader: (12)
Join Date: Mar 2008
Location: Springfield, VA
Posts: 226
Likes: 0
Received 0 Likes
on
0 Posts
Hey guys
1. For those who had issues w/ their keys...I want to assure ya that the keys were VIN Cut BY MAZDA. And it seems like only 1 or 2 ppl had a prob w/ their VIN-cut keys. The only scenarios that I can imagine are:
- A) The VIN you supplied was wrong
- B) The VIN you supplied is right, BUT the lock cylinders on your car have been changed at some point (possibly prior to your ownership)
- C) The VIN you supplied is right, the lock cylinder matches, but the cylinder + your original key have had enough wear & tear that the new VIN-cut key needs to be filed down some to work properly.
1. For those who had issues w/ their keys...I want to assure ya that the keys were VIN Cut BY MAZDA. And it seems like only 1 or 2 ppl had a prob w/ their VIN-cut keys. The only scenarios that I can imagine are:
- A) The VIN you supplied was wrong
- B) The VIN you supplied is right, BUT the lock cylinders on your car have been changed at some point (possibly prior to your ownership)
- C) The VIN you supplied is right, the lock cylinder matches, but the cylinder + your original key have had enough wear & tear that the new VIN-cut key needs to be filed down some to work properly.
The VIN I provided is correct, I don't see how it could be wear and tear since the top part of the new key is very different than my original. I guess it could be the lock cylinders (I have no way of really knowing the complete history of the car over multiple owners). If you have any more red keys can I just pay for a new blank one? I'm not asking for a handout or freebie.
#294
Full Member
iTrader: (4)
Paid on $68.20 on July 18, 2008 for 2 red steel key with no Vin cutting.
Received an email on Dec. 26, 2009 with order details and my address (no instructions)
1. FD3S2005 Keys werent cut like original, going to check something tho first
2. KKMpunkrock2011
3. Jdmrxluver (my old user name)
4. Tyburn
5. Flunkysama
6.
7.
Received an email on Dec. 26, 2009 with order details and my address (no instructions)
1. FD3S2005 Keys werent cut like original, going to check something tho first
2. KKMpunkrock2011
3. Jdmrxluver (my old user name)
4. Tyburn
5. Flunkysama
6.
7.
#296
IB Staff
Hey Ramy, might be easiest if you send me a phone number via PM and I'll give you a call to discuss. cheers!
#298
IB Staff
Does anyone have a phone number for Ramy? I will attempt to call him. Please PM me with it.