Hey guys,

The original thread was deleted by someone (NOT me), so I lost all that info. If anyone still has any outstanding issues/unfilled orders (which I highly doubt), please post here, and I'll get you taken care of right away.

Thanks,
~Ramy
FDNewbie Imports

 

Can I get a keyless entry system with these cables/lock actuators?

 

Yes, but we haven't quite gotten to the point where we've been able to retrofit the entire OEM system into a US FD...yet. So this is a thread just to make sure all outstanding orders are filled and issues are resolved. Not a new GB

Thanks,
~Ramy

 

Hey Ramy, I picked one of these up second hand, but new. Installed it, thought i would post how I got it to work through the aftermarket alarm system. I'm not sure how it was supposed to be done and could not find the info here, seems to be gone. I transfered the US-spec cables to the J-spec latch assembly. I then ran my aftermarket alarm/actuator wires (2) through the plug in the door and under the dash, you might be able to tone out 2 spare wires, wasn't worth my time since my fender was already off. Then hook the 2 alarm/actuator wires to both the 2 wires going to the latch on the door and to the green/red stripe & the green yellow stripe in the plug no longer plugged into the latch. The 2 wires work the passenger side latch. You may have to flip 1 or both to get both locks working correctly. My crap works like a champ, Even though I dropped the ball and missed this group buy, Thanks

This is the plug and wires to work the passenger side lock.