FS and WTB go here
#126
WTB: Mazda OEM parts
Hi,
I imported my Rx7 from Japan a few years ago. It is 99' spec. Now I would like to buy some original Mazda parts for my car and the prices for OEM parts at my local dealer are high. I am from Europe and they must import the parts from Japan... and off-course they put a high profit on the parts... to bad for me. I found on RHDJapan some parts much cheaper than from my dealer. But RHDJapan doesn't have all the OEM parts. So I contacted them and ask them if it is possible to order some parts that are not listed on the web from them... they didn't help me much.
Now I would like to know if there is someone who could help me out. I would like to oreder some OEM parts in Japan. The person who is willing to help me will have to inquire about the price and shipping costs to Europe, Slovenia. I found that the Japan EMS is cheap. Off-course I am willing to pay something for the help. Anyone?
ありがとございます。Thanks!
I imported my Rx7 from Japan a few years ago. It is 99' spec. Now I would like to buy some original Mazda parts for my car and the prices for OEM parts at my local dealer are high. I am from Europe and they must import the parts from Japan... and off-course they put a high profit on the parts... to bad for me. I found on RHDJapan some parts much cheaper than from my dealer. But RHDJapan doesn't have all the OEM parts. So I contacted them and ask them if it is possible to order some parts that are not listed on the web from them... they didn't help me much.
Now I would like to know if there is someone who could help me out. I would like to oreder some OEM parts in Japan. The person who is willing to help me will have to inquire about the price and shipping costs to Europe, Slovenia. I found that the Japan EMS is cheap. Off-course I am willing to pay something for the help. Anyone?
ありがとございます。Thanks!
#127
Full Member
iTrader: (5)
Join Date: May 2007
Location: Okinawa, Japan
Posts: 196
Likes: 0
Received 0 Likes
on
0 Posts
I'm in Okinawa. Shoot me a list to my email of what you need and I'll research for you. RX7s are all over the place here.
smparkerx7@gmail.com
smparkerx7@gmail.com
#133
Radioactive Rotary Rocket
Join Date: Aug 2005
Location: Minneapolis, MN
Posts: 1,061
Likes: 0
Received 0 Likes
on
0 Posts
I'm selling my 95 FD Type-R. I'm looking to get 400,000. They're going for about 350,000 on the auction right now for one like this and I'd prefer to just sell it to someone directly because I know the dealerships are just going to mark it up a whole bunch and if you buy from an auction you never get all the paperwork like I have or the full details on the car. Anyway so it has 72,000 KM. A 2 way Cusco LSD, a ARC International aluminum radiator, HKS induction kit, HKS catback, and it comes with two sets of wheels and tires. I have a set of 18" Wedsports, and the stock 17" wheels with R-compounds on them. The engine compression is all above 8.0 KG/CC squared, which is ovver 120 PSI on all rotors. So it's got a strong engine which is the most important part. All the interior pieces are there including the type-r seats and the backseat. It comes with a Greddy E-Manage computer with wiring harness that is not hooked up, a turbo timer, radar detector and alarm system. All the fluids are fresh, no shaken.
#136
Kureiji Gaijin
iTrader: (2)
http://page2.auctions.yahoo.co.jp/jp/auction/b130727503
Unfortunately, I don't have the means to order through yahoo auctions. If you can find anyone that can, here's help. Yahoo auctions usually has what I'm looking for.
Unfortunately, I don't have the means to order through yahoo auctions. If you can find anyone that can, here's help. Yahoo auctions usually has what I'm looking for.
#137
Thrashing your Roy score!
iTrader: (19)
Pissed off FC and FD sub box
FC3S 2nd Gen RX-7 Ported Engine Core
*3rd Gen upperintake with a 4 injector custom fuel system installed.
*3rd Gen alternator with custom pully set up.
*3rd Gen modified wiring harness.
*Solid Motor Mounts
*Oil baffle plate
I do not have a detailed history of the engine so I am selling as "parts only" with a modest discription and a modest price. That said, it passes the "hiss" test on all 6 apex seals. Looking through the enlarged exhaust port the seals and the housings look good to me. Please be your own judge of its condition before... you purchase it.
70,000 Yen OBO
Please see video link.
http://videobam.com/plKvP (Please pop up but its free and no virus)
Ask about discount code: "I know WTF I'm doing"
Use email.
FD3S 3rd Gen RX-7 prof. subwoofer box
It replaces the back seat or storage bins. Will hold two 8" subwoofers of your choice. Has some minor scuffs but is overall in nice condition.
17,500 Yen.
See link for video.
http://videobam.com/oGeYL (Please pop up but its free and no virus)
Use email.
*3rd Gen upperintake with a 4 injector custom fuel system installed.
*3rd Gen alternator with custom pully set up.
*3rd Gen modified wiring harness.
*Solid Motor Mounts
*Oil baffle plate
I do not have a detailed history of the engine so I am selling as "parts only" with a modest discription and a modest price. That said, it passes the "hiss" test on all 6 apex seals. Looking through the enlarged exhaust port the seals and the housings look good to me. Please be your own judge of its condition before... you purchase it.
70,000 Yen OBO
Please see video link.
http://videobam.com/plKvP (Please pop up but its free and no virus)
Ask about discount code: "I know WTF I'm doing"
Use email.
FD3S 3rd Gen RX-7 prof. subwoofer box
It replaces the back seat or storage bins. Will hold two 8" subwoofers of your choice. Has some minor scuffs but is overall in nice condition.
17,500 Yen.
See link for video.
http://videobam.com/oGeYL (Please pop up but its free and no virus)
Use email.
#139
japan connection
iTrader: (52)
cheap FD for sale
Hey guys,
Anyone interested in a cheap FD?
It currently does not have shaken but getting shaken would not be a problem.
Specs:
Engine was rebuilt by Panspeed about 3 years ago (checking on how many km ago). Has a Panspeed rom tuned ecu on stock turbos with stock ports.
Front mount intercooler, 3 core radiator, bov, aftermarket clutch.
Suspension is: Ohlins (panspeed spec)
aero: Mazdaspeed bumper, Garage Kagotani rear diffuser, Mazdaspeed wing
Wheels: ugly advans...
price: 250,000 jpy
Car is located in Chiba pref.
Anyone interested in a cheap FD?
It currently does not have shaken but getting shaken would not be a problem.
Specs:
Engine was rebuilt by Panspeed about 3 years ago (checking on how many km ago). Has a Panspeed rom tuned ecu on stock turbos with stock ports.
Front mount intercooler, 3 core radiator, bov, aftermarket clutch.
Suspension is: Ohlins (panspeed spec)
aero: Mazdaspeed bumper, Garage Kagotani rear diffuser, Mazdaspeed wing
Wheels: ugly advans...
price: 250,000 jpy
Car is located in Chiba pref.
#140
Radioactive Rotary Rocket
Join Date: Aug 2005
Location: Minneapolis, MN
Posts: 1,061
Likes: 0
Received 0 Likes
on
0 Posts
Tell ya what, I got an FD I'm selling too. It's basically stock with 72,000 km. Not as much on the performance side as the one above, but the paint and interior are in good shape. 200,000 yen.
It's got a Koyo aluminum radiator, 3" catback, HKS induction kit & BOV. Cusco LSD.
I've got the original service manual and oil change log using BE-UP oil, it's 20,000 yen for 4 quarts so it's supposed to be pretty good. This is an R2 model so no sunroof but it has the blue suede seats and momo steering wheel, dual oil coolers. It does 1'10" around Tsukuba circuit comfortably without overheating.
Yes original service record! Each rotor has over 120 PSI compression on every face since the last compression test performed by the dealer one year ago. It's only been driven 100 KM since then so I guarantee the motor is still strong. I start it up every other week and it sits in garage. It also comes with a nice aftermarket head unit, radar detector, alarm system, and turbo timer. The car has obviously been taken well care of by the guy I bought it from and I've only made it better since I got it by refreshing the bushings and installing the nicer radiator.
You got two choices of rims, or both if you want to pay for them. You can see both in the pics. The 17" OE wheels have S tires, the 18" Wedsport wheels have wider rubber, but it's old rubber and needs to be replaced. Your choice.
It's got a Koyo aluminum radiator, 3" catback, HKS induction kit & BOV. Cusco LSD.
I've got the original service manual and oil change log using BE-UP oil, it's 20,000 yen for 4 quarts so it's supposed to be pretty good. This is an R2 model so no sunroof but it has the blue suede seats and momo steering wheel, dual oil coolers. It does 1'10" around Tsukuba circuit comfortably without overheating.
Yes original service record! Each rotor has over 120 PSI compression on every face since the last compression test performed by the dealer one year ago. It's only been driven 100 KM since then so I guarantee the motor is still strong. I start it up every other week and it sits in garage. It also comes with a nice aftermarket head unit, radar detector, alarm system, and turbo timer. The car has obviously been taken well care of by the guy I bought it from and I've only made it better since I got it by refreshing the bushings and installing the nicer radiator.
You got two choices of rims, or both if you want to pay for them. You can see both in the pics. The 17" OE wheels have S tires, the 18" Wedsport wheels have wider rubber, but it's old rubber and needs to be replaced. Your choice.
#142
Full Member
iTrader: (3)
Join Date: Sep 2007
Location: Misawa, Japan
Posts: 77
Likes: 0
Received 0 Likes
on
0 Posts
I have a buddy that's wanted a 7 for a while. I'll let him know. Any idea how much it might cost to ship up to Aomori?
Tell ya what, I got an FD I'm selling too. It's basically stock with 72,000 km. Not as much on the performance side as the one above, but the paint and interior are in good shape. 200,000 yen.
It's got a Koyo aluminum radiator, 3" catback, HKS induction kit & BOV. Cusco LSD.
I've got the original service manual and oil change log using BE-UP oil, it's 20,000 yen for 4 quarts so it's supposed to be pretty good. This is an R2 model so no sunroof but it has the blue suede seats and momo steering wheel, dual oil coolers. It does 1'10" around Tsukuba circuit comfortably without overheating.
Yes original service record! Each rotor has over 120 PSI compression on every face since the last compression test performed by the dealer one year ago. It's only been driven 100 KM since then so I guarantee the motor is still strong. I start it up every other week and it sits in garage. It also comes with a nice aftermarket head unit, radar detector, alarm system, and turbo timer. The car has obviously been taken well care of by the guy I bought it from and I've only made it better since I got it by refreshing the bushings and installing the nicer radiator.
You got two choices of rims, or both if you want to pay for them. You can see both in the pics. The 17" OE wheels have S tires, the 18" Wedsport wheels have wider rubber, but it's old rubber and needs to be replaced. Your choice.
It's got a Koyo aluminum radiator, 3" catback, HKS induction kit & BOV. Cusco LSD.
I've got the original service manual and oil change log using BE-UP oil, it's 20,000 yen for 4 quarts so it's supposed to be pretty good. This is an R2 model so no sunroof but it has the blue suede seats and momo steering wheel, dual oil coolers. It does 1'10" around Tsukuba circuit comfortably without overheating.
Yes original service record! Each rotor has over 120 PSI compression on every face since the last compression test performed by the dealer one year ago. It's only been driven 100 KM since then so I guarantee the motor is still strong. I start it up every other week and it sits in garage. It also comes with a nice aftermarket head unit, radar detector, alarm system, and turbo timer. The car has obviously been taken well care of by the guy I bought it from and I've only made it better since I got it by refreshing the bushings and installing the nicer radiator.
You got two choices of rims, or both if you want to pay for them. You can see both in the pics. The 17" OE wheels have S tires, the 18" Wedsport wheels have wider rubber, but it's old rubber and needs to be replaced. Your choice.
#143
Radioactive Rotary Rocket
Join Date: Aug 2005
Location: Minneapolis, MN
Posts: 1,061
Likes: 0
Received 0 Likes
on
0 Posts
Yeah the paint is the same, it's just dirty and needs a wash and wax because it hasn't been waxed in over a year. You can show those pictures to the potential buyer as an accurate representation of the car.
I don't know anything about delivery, sorry. I have a feeling it will be expensive. I tried to have a car delivered before and it was about 1,000 yen per kilometer. That was a flatbed towtruck however and for Aomori it would probably be a car hauler truck which would seem to be much more reasonable. So really I can't say and I don't know of any companies that do that. Normally car sales are done from dealerships in Japan and private sales are quite rare so most of these companies don't deal with the public, especially not foreigners. So they aren't going to have a website with a shipping calculator or anything. You'd have to call up and ask.
I don't know anything about delivery, sorry. I have a feeling it will be expensive. I tried to have a car delivered before and it was about 1,000 yen per kilometer. That was a flatbed towtruck however and for Aomori it would probably be a car hauler truck which would seem to be much more reasonable. So really I can't say and I don't know of any companies that do that. Normally car sales are done from dealerships in Japan and private sales are quite rare so most of these companies don't deal with the public, especially not foreigners. So they aren't going to have a website with a shipping calculator or anything. You'd have to call up and ask.
#148
japan connection
iTrader: (52)
I have an FC missile and it is already up at Ebisu. I need to sell it this summer if anyone is interested. I would like to sell it for about 60,000 jpy. Has 2 was cusco lsd, cusco coilovers, exhaust, rom tuned ecu, dtss eliminators, steering spacers, new mazdaspeed clutch, and plenty of wall tapping experience hahaha. It still drives straight and drifts great!
I also am selling my original FC that I have been working on since I first came to japan.
I have to sell it before I move back to the US. I would like to have painted it again but I think if I painted it the value would only increas slightly and I would have wasted more time.
Anyhow here is the auction ad.
http://page10.auctions.yahoo.co.jp/jp/auction/m97633080
I also am selling my original FC that I have been working on since I first came to japan.
I have to sell it before I move back to the US. I would like to have painted it again but I think if I painted it the value would only increas slightly and I would have wasted more time.
Anyhow here is the auction ad.
http://page10.auctions.yahoo.co.jp/jp/auction/m97633080