sen2two

iTrader: (10)

ok, heres the break down.

i have a renesis with a 12a front cover. 1st gen water pump housing and water pump. but im using the 3rd gen alternator and main pulley. with that im using the greddy light weight pulleys. (main, water, and alt.)

so the greddy main pulley bolts to the reni no problem. and obviously the FD alt. has no problem, since it was made for it. but i need this to make it work:


a completely new water pump pulley made to bolt to the 1st gen water pump, and use the FD Rib belt.

i would much rather have this than use an FC set-up or 12a set up. i could make the FD one work with a little fabbing, but since the FD water pump pulley uses the back side of the belt and not the ribs. i do not like this.

if anyone has the machinery and know how to complete this. please contact me immediatly!

thank you.

sen2two

iTrader: (10)

i just did a mock fit up.

it looks like i would just need a pulley the same exact depth of a 1st gen stock pulley. with the same diameter where the pulley meets also. but with ribs instead of the V-groove a FC or 1st gen uses.

also, maybe a Rotor on the face of it would be cool too...