Wolf 3.0 Maps
05-29-02, 03:57 AM
#1
Newbie
Thread Starter
Join Date: May 2002
Location: JAPAN
Posts: 1
Likes: 0
Received 0 Likes
on
0 Posts
Wolf 3.0 Maps
I am running a wolf 3.0 on my 1988 turbo 2 with a rebuilt side port motor and a TO4E H3 and I believe my timing is a little off to say the least around 6500 on up. I just got everything together and I want to boost around 18psi but I am afraid of damaging something. Does anyone have a good ignition curve to base line off of or know where to get some maps? What should my max ignition be? I am running a little too retarded I believe at 10 degrees. Your help is greatly appreciated.
05-29-02, 09:23 AM
#2
On a long vacation
Join Date: Feb 2001
Location: Bay Area, CA, U.S.A.
Posts: 2,160
Likes: 0
Received 0 Likes
on
0 Posts
Re: Wolf 3.0 Maps
Originally posted by Dwayne
I am running a wolf 3.0 on my 1988 turbo 2 with a rebuilt side port motor and a TO4E H3 and I believe my timing is a little off to say the least around 6500 on up. I just got everything together and I want to boost around 18psi but I am afraid of damaging something. Does anyone have a good ignition curve to base line off of or know where to get some maps? What should my max ignition be? I am running a little too retarded I believe at 10 degrees. Your help is greatly appreciated.
I am running a wolf 3.0 on my 1988 turbo 2 with a rebuilt side port motor and a TO4E H3 and I believe my timing is a little off to say the least around 6500 on up. I just got everything together and I want to boost around 18psi but I am afraid of damaging something. Does anyone have a good ignition curve to base line off of or know where to get some maps? What should my max ignition be? I am running a little too retarded I believe at 10 degrees. Your help is greatly appreciated.
05-29-02, 12:38 PM
#3
On a long vacation
Join Date: Feb 2001
Location: Bay Area, CA, U.S.A.
Posts: 2,160
Likes: 0
Received 0 Likes
on
0 Posts
You may want to look at http://www.wolfems.com/forum/showthr...s=&threadid=29 . I run 12 degrees at full load(21 PSI) and RPM(8500). 10 seems a little low.
Thread
Thread Starter
Forum
Replies
Last Post
killerrx710
Adaptronic Engine Mgmt - AUS
5
09-28-15 09:13 AM
killerrx710
2nd Generation Specific (1986-1992)
1
09-24-15 10:57 PM